-
FURTHER INFO
-
CUSTOMER SERVICE
-
SHOPPING GUIDE
-
CUSTOMER SUPPORT
Great Deal Offers 96 Parkers Walk, Newmarket England CB8 7AP United Kingdom
Available between 9AM to 5PM. Ready to answer your questions. Live Chat Support Available.
WAVESHARE
-
Waveshare HRB8825 Stepper Motor HAT For Raspberry Pi, Drives Two Stepper Motors, Up To 1/32 Microstepping
Features1. Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano 2. Onboard dual HR8825 motor controller IC with built-in microstepping indexer, drives two stepper motors, easy to use 3. 6 available microstepping modes, configured with the DIP switches: full-step, half-step, 1/4-step, 1/8-step, 1/16-step, and 1/32-step 4. Adjustable motor drive current via potentiometer, maximum 2.5A current output 5. Protection features: Overcurrent Protection (OCP), Thermal Shutdown (TSD), VM Undervoltage Lockout (UVLO) 6. Integrates 5V regulator, allows providing power to Raspberry Pi 7. Onboard multi connector options for stepper motors in different specifications 8. Comes with development resources and manual (examples in BCM2835, wiringPi, and python)Specifications1. Motor controller: HR8825 2. Motor drive voltage: 8.2V~28V 3. Motor drive current: 2.5A 4. Logic voltage: 3.3V 5. Mounting hole size: 3.0mm 6. Size: 65 x 56mmPackage List1. Stepper Motor HAT (B) x 1 2. RPi screws pack (2pcs) x 1 3. Aluminum heatsink x 1Specification: Package Weight One Package Weight 0.06kgs / 0.14lb One Package Size 15cm * 12cm * 3cm / 5.91inch * 4.72inch * 1.18inch Qty per Carton 200 Carton Weight 14.00kgs / 30.86lb Carton Size 46cm * 32cm * 32cm / 18.11inch * 12.6inch * 12.6inch Loading Container 20GP: 566 cartons * 200 pcs = 113200 pcs40HQ: 1314 cartons * 200 pcs = 262800 pcs
£ 10.99 GBP
-
Waveshare Solar Power Management Module for 6V~24V Solar Panel, 16120
OverviewThis solar power management module is designed for 6V~24V solar panel. It can charge the 3.7V Li battery through solar panel or USB connection, and provides 5V/1A regulated output.The module features MPPT (Maximum Power Point Tracking) function and multi protection circuits, therefore, it is able to keep working with high-efficiency, stability, and safety. It is suited for solar powered, low-power IoT, and other environmental protection projects.Features1. Supports MPPT (Maximum Power Point Tracking) function, maximizing the efficiency of the solar panel2. Supports solar panel / USB connection battery charging3. For 6V~24V solar panel, DC-002 jack input or screw terminal input4. Onboard MPPT SET switch, select the level closed to input level to improve charging efficiency5. Two 5V output interfaces: pinheaders and USB port6. Onboard high capacity aluminum electrolytic capacitor and SMD ceramic capacitor, reducing the ripple, stable performance7. 14500 battery holder and PH2.0 battery connector, for connecting multi kinds of 3.7V Li battery8. Several LED indicators, for monitoring the status of solar panel and battery9. Multi protection circuits: over charge / over discharge / reverse protection / over heat / over current, stable and safe to useSpecifications1. Solar panel input voltage (SOLAR IN): 6V~24V2. Micro USB input voltage (USB IN): 5V3. Pinheader / USB output (USB OUT): 5V 1A4. Charging cutoff voltage: 4.2V+/-1％5. Over discharging protection voltage: 2.9V+/-1％6. Solar panel charge efficiency: ~78%7. USB charge efficiency: ~82%8. 3.7V battery boost output efficiency: ~86%9. Max quiescent current: <2mA10. Operating temperature: -40~85C11. Dimension: 65.2mm x 56.2mm x 22.9mmSpecification: Package Weight One Package Weight 0.06kgs / 0.12lb One Package Size 8cm * 8cm * 2cm / 3.15inch * 3.15inch * 0.79inch Qty per Carton 500 Carton Weight 24.50kgs / 54.01lb Carton Size 40cm * 40cm * 40cm / 15.75inch * 15.75inch * 15.75inch Loading Container 20GP: 416 cartons * 500 pcs = 208000 pcs40HQ: 967 cartons * 500 pcs = 483500 pcs
£ 5.99 GBP
-
Waveshare 4-DOF Metal Robot Arm Kit for micro:bit, Support Bluetooth, US Plug
Overview1. Equip your micro:bit with this 4-DOF metal robot arm, and get started to explore the world of artificial intelligent robotic.2. This starter robotic arm kit includes: servo driver board, metal mechanical arm structure, and 4x metal gear servos. When used with the micro:bit, it is easy to control the arm by smart phone through Bluetooth connection.The Servo DriverAdopts Servo Driver for micro:bit:1. Micro:bit edge connector, directly pluggable2. I2C controlled, using only 2 pins3. Up to 16-Channel servo/PWM outputs, 12-bit resolution for each channel (4096 scales)4. Integrates 5V regulator, up to 3A output current, can be powered from battery through VIN terminal5. Standard servo interface, supports common used servo such as SG90, MG90S, MG996R, etc.6. Reserved I2C control pins, allows to work with other control boards7. Comes with development resources and manual (micro:bit graphical examples like Bluetooth/2.4G wir eless remote control)The Robot Arm Structure1. 4-DOF, large solid base, metal mechanical grasper2. Full aluminium alloy body, sandblasting oxidation surface, strong & durable3. Clever mechanical structure and mounting design, agile to control, easy to build3. Fitted with 4x metal gear servos (1x MG996R, 3x MG90S), large torque force, smooth movingPackage IncludeNote: micro:bit is NOT included.1. Metal arm parts x12. MG996R Servo x13. MG90S Servo x34. MG996R servo wheel x15. Servo Driver for micro:bit x16. Power adapter US plug 5V 3A Micro x17. Servo extension wire 150mm x18. Screws pack x19. Screwdrivers 2PCS x1Specification: Package Weight One Package Weight 0.55kgs / 1.21lb One Package Size 25cm * 15cm * 8cm / 9.84inch * 5.91inch * 3.15inch Qty per Carton 20 Carton Weight 11.00kgs / 24.25lb Carton Size 50cm * 30cm * 40cm / 19.69inch * 11.81inch * 15.75inch Loading Container 20GP: 444 cartons * 20 pcs = 8880 pcs40HQ: 1031 cartons * 20 pcs = 20620 pcs
£ 38.99 GBP
-
Waveshare 16-Channel 12-bit I2C Servo Driver HAT for Raspberry Pi, 15275
About The ProductNeedless to say, the Raspberry Pi is powerful enough in most cases, yet it is not that good at providing precise PWM output. You may have tried to control a robotic arm or a hexapod walker by using the Pi, but finally get frustrated due to the limited number of PWM outputs and the jittering servo. Now you get a new option to bring your ideas to life, we prepare this useful Servo Driver HAT for you. Features 1. Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano 2. I2C controlled, using only 2 pins 3. Up to 16-Channel servo/PWM outputs, 12-bit resolution for each channel (4096 scales) 4. Integrates 5V regulator, up to 3A output current, can be powered from battery through VIN terminal 5. Standard servo interface, supports common used servo such as SG90, MG90S, MG996R, etc. 6. Reserved I2C control pins, allows to work with other control boards 7. Comes with development resources and manual (examples in python like Bluetooth/WiFi remote control) Specifications 1. Power supply: 5V (Pi connector) OR 6V~12V (VIN terminal) 2. Servo voltage: 5V 3. Logic voltage: 3.3V 4. Driver: PCA9685 5. Control interface: I2C 6. Dimension: 65mm x 30mm 7. Mounting hole size: 3.0mm 8. Supported Servo This HAT can be used to drive servos such as: - SG90 Servo - MG90S Servo - MG996R ServoPackage List1. Servo Driver HAT x1 2. RPi screws pack (2pcs) x1 Note: Raspberry Pi and servos are NOT included.Specification: Package Weight One Package Weight 0.03kgs / 0.07lb One Package Size 15cm * 12cm * 2cm / 5.91inch * 4.72inch * 0.79inch Qty per Carton 200 Carton Weight 6.00kgs / 13.23lb Carton Size 32cm * 22cm * 22cm / 12.6inch * 8.66inch * 8.66inch Loading Container 20GP: 1721 cartons * 200 pcs = 344200 pcs40HQ: 3996 cartons * 200 pcs = 799200 pcs
£ 10.99 GBP
-
Waveshare 4G / 3G / 2G / GSM / GPRS / GNSS HAT for Raspberry Pi, LTE CAT4, for Southeast Asia, West Asia, Europe, Africa, 4G / 3G / 2G / GSM / GPRS / GNSS HAT
4G/3G/GNSS HAT for Raspberry Pi, Based on SIM7600E-HApplicable Region1. SIM7600A-H is mainly applicable in North America (US, CA, MX), SIM7600E-H is mainly applicable in Southeast Asia, West Asia, Europe, Africa, SIM7600CE-T is mainly applicable in China.2. Please check the supported bands according to your local service provider, select the proper one when placing order.Overview1. The SIM7600A-H 4G HAT is a 4G communication and GNSS positioning module, which supports LTE CAT4 up to 150Mbps for downlink data transfer. it is pretty low power consumption.2. You can connect this 4G module with computer to surf the Internet, or attach it onto Raspberry Pi to enable functions like 4G high speed connection, wireless communication, making telephone call, sending SMS, global positioning, etc.Features1. Raspberry Pi connectivity, compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+2. Support dial-up, telephone call, SMS, MMS, mail, TCP, UDP, DTMF, HTTP, FTP, etc.3. Support GPS, BeiDou, Glonass, LBS base station positioning4. Onboard USB interface, to test AT Commands, get GPS positioning data, and so on5. Onboard CP2102 USB to UART converter, for serial debugging6. Breakout UART control pins, to connect with host boards like Arduino/STM327. SIM card slot, supports 1.8V/3V SIM card8. Onboard audio jack and audio decoder for making telephone call9. 2x LED indicators, easy to monitor the working status10. Onboard voltage translator, operating voltage can be configured to 3.3V or 5V via jumper11. Baudrate: 300bps ~ 4Mbps (default: 115200bps)12. Autobauding baudrate: 9600bps ~ 115200bps13. Control via AT commands (3GPP TS 27.007, 27.005, and V.25TER command set)14. Support SIM application toolkit: SAT Class 3, USAT15. Come with development resources and manual (examples for Raspberry Pi/Arduino/STM32)Communications Specifications1. Band: - LTE-- SIM7600A-H: --- LTE-FDD B2/B4/B12-- SIM7600E-H: --- LTE-FDD B1/B3/B5/B7/B8/B20--- LTE-TDD B38/B40/B41-- SIM7600CE-T: --- LTE-TDD B38/B39/B40/B41--- LTE-FDD B1/B3/B8- WCDMA / TD-SCDMA / CDMA 2000-- SIM7600A-H: --- UMTS/HSPA+ B2/B5-- SIM7600E-H: --- UMTS/HSPA+ B1/B5/B8-- SIM7600CE-T:--- UMTS/HSDPA/HSPA+ B1/B8--- TD-SCDMA B34/B39 --- CDMA 1X/EVDO BC0- GSM/GPRS/EDGE 900/1800 MHz2. Generation: 4G, 3G, 2.5G, 2G3. Emitting power: 0.25W, 0.5W@EGSM900, 0.4W@DCS1800, 2W@GSM900, 1W@DCS18004. Data Speed- LTE CAT 4-- Uplink=<50 Mbps-- Downlink=<150 Mbps- UMTS-- Uplink=<384Kbps-- Downlink=<384Kbps- EDGE-- Uplink=<236.8kbps-- Downlink=<236.8kbps- GPRS-- Uplink=<85.6kbps-- Downlink=<85.6kbps- HSPA+-- Uplink=<5.76Mbps-- Downlink=<42MbpsGNSS Specifications1. Receiver type- 16-channel- C/A code2. Sensitivity- Tracking: -159 dBm (GPS) / -158 dBm (GLONASS) / TBD (BD)- Cold starts: -148 dBm3. Time-To-First-Fix (open air)- Cold starts: <35s- Hot starts: <1s4. Accuracy- Position: <2.5m CEPSMS and Audio Specifications1. SMS- Support types: MT, MO, CB, Text, PDU- Storage: USIM card and ME (default)2. Audio feature- Support echo cancellation- Support noise reductionOther Specifications1. Power supply: 5V2. Operating voltage: 5V/3.3V (configured via jumper)3. Operating temperature: -30 degree C ~ 80 degree C4. Storage temperature: -45 degree C ~ 90 degree C5. Dimension: 56.21mm x 65.15mmWhat is on Board1. SIM7600E-H2. CP2102 USB to UART converter3. NAU8810 audio decoder4. TXS0108EPWR voltage translator: translates 3.3V/5V into 1.8V5. MP2128DT power chip6. MP1482 power chip7. Raspberry Pi GPIO header: for connecting with Raspberry Pi8. SIM7600 control interface: for connecting with host boards like Arduino/STM329. SIM card slot: supports 1.8V/3V SIM card10. TF card slot: allows file/SMS/... storage11. 3.5mm earphone/mic jack12. USB interface: for testing AT Commands, getting GPS positioning data, etc.13. USB to UART interface: for serial debugging, or login to Raspberry Pi14. MAIN antenna connector15. AUX antenna connector16. GNSS antenna connector17. Power switch18. Network status indicator19. Power indicator20. Operating voltage selection jumper: - VCCIO - 3.3V: set operating voltage as 3.3V- VCCIO - 5V: set operating voltage as 5V21. UART selection jumper: - A: Access Raspberry Pi via USB to UART- B: Control the SIM7600 by Raspberry Pi- C: Control the SIM7600 via USB to UARTPackage Contents1. SIM7600E-H 4G HAT x12. LTE Antenna x13. GPS External Antenna (B) x14. USB type A plug to micro plug cable x25. RPi screws pack (2pcs) x1Specification: Package Weight One Package Weight 0.25kgs / 0.55lb One Package Size 15cm * 8cm * 3cm / 5.91inch * 3.15inch * 1.18inch Qty per Carton 260 Carton Weight 68.38kgs / 150.75lb Carton Size 60cm * 40cm * 39cm / 23.62inch * 15.75inch * 15.35inch Loading Container 20GP: 284 cartons * 260 pcs = 73840 pcs40HQ: 661 cartons * 260 pcs = 171860 pcs
£ 48.99 GBP
-
Waveshare Gamepad module for micro:bit, Joystick and Button
OverviewThis little module adds arcade controls to your micro:bit, makes it possible to turn the micro:bit into a mini game console. Theres onboard buzzer to play music and game background effect. It is powered from a 14500 Li-ion battery (not included), conversely, it allows to charge the battery through USB connection.Features1. micro:bit edge connector, directly pluggable2. High quality joystick, dual channel analog outputs for precise positioning, one channel digital output for press control3. Onboard battery and charge circuitry, powered from battery, also charges the battery through USB connection4. Battery indicator, blinks 1/2/3/4 times indicates the power remains about 25%/50%/75%/100% respectively5. 4x colorful buttons6. 2x side buttons, related to the A/B buttons of micro:bit, easy to use7. Buzzer for playing music and game background effect8. Comes with development resources (micro:bit graphical demo/python code/user manual, etc.)Specifications1. Operating voltage: 5V2. Battery type: 14500 Li-ion3. Dimension: 150mm x 50mmSpecification: Package Weight One Package Weight 0.02kgs / 0.04lb One Package Size 17cm * 6cm * 2cm / 6.69inch * 2.36inch * 0.79inch Qty per Carton 360 Carton Weight 7.20kgs / 15.87lb Carton Size 51cm * 36cm * 40cm / 20.08inch * 14.17inch * 15.75inch Loading Container 20GP: 363 cartons * 360 pcs = 130680 pcs40HQ: 842 cartons * 360 pcs = 303120 pcs
£ 17.99 GBP
-
Waveshare WM8960 Stereo CODEC Audio Module, Play/Record, Stereo CODEC Audio Module
OverviewThis low power audio module is based on WM8960, supports stereo encoding/decoding, supports sound recording, whats more, it can directly drive speakers to play music.Features1. Integrates high-quality MEMS silicon Mic, supports sound recording2. Onboard standard 3.5mm 4-segment earphone jack, allows sound recording via external earphones with Mic3. Onboard dual-channel speaker interface, directly drives speakers4. Supports common audio sampling rates such as 8/11.025/22.05/44.1/48KHz, etc.5. Supports sound effects such as stereo, 3D surrounding, etc.6. Comes with development resources and manual (STM32 examples for playing, recording)Specifications1. CODEC: WM89602. Operating voltage: 3.3V3. Control interface: I2C4. Audio interface: I2S5. Audio format: WAV6. DAC signal-noise ratio: 98dB7. ADC signal-noise ratio: 94dB8. Earphone driver: 40mW (16Ω@3.3V)9. Speaker driver: 1W per channel (8Ω BTL)Specification: Package Weight One Package Weight 0.02kgs / 0.04lb One Package Size 7cm * 4cm * 2cm / 2.76inch * 1.57inch * 0.79inch Qty per Carton 1600 Carton Weight 15.00kgs / 33.07lb Carton Size 56cm * 40cm * 40cm / 22.05inch * 15.75inch * 15.75inch Loading Container 20GP: 297 cartons * 1600 pcs = 475200 pcs40HQ: 690 cartons * 1600 pcs = 1104000 pcs
£ 17.99 GBP
-
Waveshare Solar Power Management Module for 6V~24V Solar Panel, 16120
OverviewThis solar power management module is designed for 6V~24V solar panel. It can charge the 3.7V Li battery through solar panel or USB connection, and provides 5V/1A regulated output.The module features MPPT (Maximum Power Point Tracking) function and multi protection circuits, therefore, it is able to keep working with high-efficiency, stability, and safety. It is suited for solar powered, low-power IoT, and other environmental protection projects.Features1. Supports MPPT (Maximum Power Point Tracking) function, maximizing the efficiency of the solar panel2. Supports solar panel / USB connection battery charging3. For 6V~24V solar panel, DC-002 jack input or screw terminal input4. Onboard MPPT SET switch, select the level closed to input level to improve charging efficiency5. Two 5V output interfaces: pinheaders and USB port6. Onboard high capacity aluminum electrolytic capacitor and SMD ceramic capacitor, reducing the ripple, stable performance7. 14500 battery holder and PH2.0 battery connector, for connecting multi kinds of 3.7V Li battery8. Several LED indicators, for monitoring the status of solar panel and battery9. Multi protection circuits: over charge / over discharge / reverse protection / over heat / over current, stable and safe to useSpecifications1. Solar panel input voltage (SOLAR IN): 6V~24V2. Micro USB input voltage (USB IN): 5V3. Pinheader / USB output (USB OUT): 5V 1A4. Charging cutoff voltage: 4.2V+/-1％5. Over discharging protection voltage: 2.9V+/-1％6. Solar panel charge efficiency: ~78%7. USB charge efficiency: ~82%8. 3.7V battery boost output efficiency: ~86%9. Max quiescent current: <2mA10. Operating temperature: -40~85C11. Dimension: 65.2mm x 56.2mm x 22.9mmSpecification: Package Weight One Package Weight 0.06kgs / 0.12lb One Package Size 8cm * 8cm * 2cm / 3.15inch * 3.15inch * 0.79inch Qty per Carton 500 Carton Weight 24.50kgs / 54.01lb Carton Size 40cm * 40cm * 40cm / 15.75inch * 15.75inch * 15.75inch Loading Container 20GP: 416 cartons * 500 pcs = 208000 pcs40HQ: 967 cartons * 500 pcs = 483500 pcs
£ 14.99 GBP
-
Waveshare WAVEGO 12-DOF Bionic Dog-Like Robot, Basic Version, Basic Version
FeaturesThe WAVEGO is a high-DOF bionic dog-like robot which features 2.3kg.cm large torque servos, reliable structure, and flexible motion, incorporating devices like front camera, 9-axes motion tracker, RGB indicator, etc., together with open source multi-platform Web application. It uses the ESP32 as sub controller for connecting rod inverse solving and gait generation, sharing calculating task for the host controller, an additional Raspberry Pi can be attached as the host controller for high-level decision operating. 1. Overall 12-DOF, multi connecting rods leg design, increasing the servo effective torque 2. A real time operating system is used as sub controller for connecting rod inverse solving and gait generation, sharing calculating task for the host controller and improving the gait solving efficiency 3. Ultra compact structure design, allows using on the table, aluminum alloy + nylon structure materials, ensuring strength while keeping it light weight 4. Additional Raspberry Pi can beattached as the host controller to enable OpenCV high-level functions, demo codes including facial recognition, motion detection, color tracking, and more. Reserved extension interface for secondary development, along with user manual and secondary development documents.SpecificationsGeneral: 1. Product name: WAVEGO high-DOF bionic quadruped robot 2. Stand up: length 218mm, width 116mm, height 152mm 3. Lie down: length 228mm, width 116mm, height 127mm 4. Overall weight: 465g (with batteries) 5. DOF: 12 overall, 3 per single leg Operating system: Demo code: FreeRTOS + Raspberry Pi OS Motion performance: 1. Available gait: Shake hands, stand up, crouch slowly, diagonal gait , jump, self-balancing 2. Motion extension: Providing motion programming example, including flexible Bezier curve speed motion function 3. Load: 300g Servo info.: 1. Dimensions: 23.2 x12.1 x25.25 mm 2. Weight: 13.0 +/- 1g 3. Operating voltage: 6V 4. Idle speed: 0.1sec/60 degree (100RPM) 5. Stalling torque: 2.3kg.cm (31.99oz.in) 6. Rated load: 0.7kg.cm 7. Rated current: 350mA 8. Control method: Pulse width modification 9. Control system type: Digital comparator Visual function: 1. FreeRTOS demo: Web-based real time video streaming 2. Raspberry Pi OS demo: Real time video streaming, facial recognition, color tracking, moving object detection Note: All the demo codes are open sourced, the Raspberry Pi OS demo is based on open source projects flask-streaming and OpenCV Processor and memory: 1. ESP32 sub controller: Processor: Xtensa LX6 dual-core processor 240MHz 2. SRAM: 520KB+8MB 3. Flash: 448KB+4MB Others: 1. WiFi standard: 802.11b/g/n 2. Bluetooth standard: Bluetooth 4.2, including traditional Bluetooth (BR/EDR) and Bluetooth low energy (BLE) 3. External port: 2 x 5P multi-function extension port (host controller communication, power supply selection, assembly mode selection, etc.) 4. DC battery charger jack: Type-C (download, UART communication, peripheral expansion) Power supply: 1. Battery type: 18650 Li-ion batteries (NOT included) 2. Supply voltage: 7-8.4V 3. Recharge voltage: 8.4V 4. Protection: Over charge, discharge protection, over current protection, short circuit protection, reverse proof, equalizing charge, stable and safe operating 5. Output voltage: provides 5V output for other host controllerPackage List1. WAVEGO body case x 1 2. WAVEGO basic parts x 1 3. Semi-transparent acrylic panel x 1 4. Double-sided sticker x 1 5. WAVEGO base board x 1 6. 2MP camera x 1 7. 2.4G antenna x 1 8. 0.91 inch OLED display x 1 9. Micro thrust bearing x 14 10. Micro ball flange bearing x30 11. USB cable (~1m) x 1 12. Plus screwdriver x 1 13. Cross wrench sleeve x 1 14. IPEX 1 to SMA cable (~17cm) x 1 15. Jumper wire (~20cm) x4 16. 4PIN PH2.0 cable x 1 17. Servo pack x 1 18. 8.4V 2A battery charger x 1 19. Screws and standoffs x 1Specification: Package Weight One Package Weight 1.06kgs / 2.34lb One Package Size 26cm * 22cm * 10cm / 10.24inch * 8.66inch * 3.94inch Qty per Carton 20 Carton Weight 16.00kgs / 35.27lb Carton Size 52cm * 53cm * 45cm / 20.47inch * 20.87inch * 17.72inch Loading Container 20GP: 215 cartons * 20 pcs = 4300 pcs40HQ: 499 cartons * 20 pcs = 9980 pcs
£ 303.99 GBP
-
Waveshare Industrial USB to RS485 Converter
About The ProductOverview 1. This is an industrial USB to RS485 converter with original FT232RL and SP485EEN inside. It features embedded protection circuits such as lightningproof, resettable fuse, ESD protection, and TVS diode, etc. It is pretty small in size. 2. The USB TO RS485 is very easy to use, allows automatic transceiving. Due to its fast communication, stability, reliability, and safety, it is an ideal choice for industrial control equipments and/or applications with high communication requirement. Features 1. USB to RS485 communication 2. Adopt original FT232RL and SP485EEN, fast communicating, stable and reliable, better compatibility 3. Onboard TVS (Transient Voltage Suppressor), effectively suppress surge voltage and transient spike voltage in the circuit, lightningproof & anti-electrostatic 4. Onboard self-recovery fuse and protection diodes, ensures the current/voltage stable outputs, provides over-current/over-voltage proof, improves shock resistance 5. 3 LEDs for indicating the power and transceiver status Specifications 1. Product type: Industrial converter 2. Baudrate: 300-921600bps 3. Host port: USB 4. Device port: RS485 5. USB: - Operating voltage: 5V - Connector: USB-A - Protection: 200mA self-recovery fuse, ESD protection - Transmission distance: about 5m 6. RS485: - Connector: screw terminal - Pins: A+, B-, GND - Direction control: hardware automatic control - Protection: 600W lightningproof and surge-suppress, 15KV ESD protection (onboard 120R balancing resistor) - Transmission distance: about 1200m (low rate) - Transmission mode: point-to-multipoints (up to 32 nodes, it is recommended to use repeaters for 16 nodes or more) 7. LED indicators: - PWR: red power indicator, light up when there is USB connection and voltage is detected - TXD: red TX indicator, light up when the USB port sends data - RXD: red RX indicator, light up when the device ports send data back 8. Operating environment: - Temperature: -15 ~ 70 degree - Humidity: 5%RH ~ 95%RH 9. Operating system: Mac, Linux, Android, WinCE, Windows 10 / 8.1 / 8 / 7 / XPPackage List1. USB TO RS485 x 1 2. USB-A male to female cable x 1 3. Screwdriver x 1Specification: Package Weight One Package Weight 0.09kgs / 0.21lb One Package Size 15cm * 12cm * 2cm / 5.91inch * 4.72inch * 0.79inch Qty per Carton 200 Carton Weight 19.00kgs / 41.89lb Carton Size 42cm * 22cm * 22cm / 16.54inch * 8.66inch * 8.66inch Loading Container 20GP: 1311 cartons * 200 pcs = 262200 pcs40HQ: 3045 cartons * 200 pcs = 609000 pcs
£ 19.99 GBP
-
Waveshare 5.5 inch 1080x1920 Capacitive Touch Screen AMOLED with Toughened Glass Cover, HDMI interface, Supports Multi Systems, 5.5 inch
OverviewThis is a 5.5inch AMOLED display. Compared with LCD, it has advantages of high contrast, wide color gamut, and wide viewing angle, which make it able to bring vivid and delicate visual experience.Features1. 5.5 inch AMOLED, 1080x1920 resolution2. Toughened glass capacitive touch panel, 6H hardness3. Support popular mini PCs such as Raspberry Pi, Jetson Nano, as well as general desktop computers4. When works with Raspberry Pi, supports Raspbian / Ubuntu / Kali / Retropie, driver free5. When works as a computer monitor, support Windows 10/8.1/8/7, five-points touch, and driver free6. 3.5mm audio jack, supports HDMI audio output7. M2.5 screw holes for easy mountingPackage Contents1. 5.5inch HDMI AMOLED x12. HDMI cable x13. USB type A plug to micro B plug cable x14. HDMI adapter (B) x15. USB adapter (B) x16. Screws pack x1Specification: Package Weight One Package Weight 0.37kgs / 0.82lb One Package Size 20cm * 15cm * 8cm / 7.87inch * 5.91inch * 3.15inch Qty per Carton 24 Carton Weight 10.00kgs / 22.05lb Carton Size 42cm * 32cm * 42cm / 16.54inch * 12.6inch * 16.54inch Loading Container 20GP: 472 cartons * 24 pcs = 11328 pcs40HQ: 1096 cartons * 24 pcs = 26304 pcs
£ 152.99 GBP
-
Waveshare RS485 to Ethernet Converter, US Plug, RS485
RS485 to Ethernet Converter, Easy-to-use, High-speed, Low-power, High-stability, UpgradableOverviewThe RS485 TO ETH module provides an easy way to communicate between RS485 and RJ45 port Ethernet, it can be configured via webpage.Features1. M0 series 32-bit ARM processor, fast speed, high efficiency2. 10/100M Auto-MDI/MDIX ethernet interface, regardless of cross-over or straight-through cable3. Configurable RS485 baudrate (600bps~230.4Kbps), supports five parity check options: None, Odd, Even, Mark, Space4. Available working modes: TCP Server, TCP Client, UDP Server, UDP Client, HTTPD Client (supports GET and POST)5. Configurable via webpage, AT commands, serial protocol, and network protocol, provides configuration protocol which can be integrated to your own software6. Support customized heartbeat packets, make sure the connection is truthful, as well as for actively retrieving sensor data7. Support customized registration packets, auto passing the registered packet as identifier after the connection is established, so that different devices can be distinguished8. Support customized webpage, allows user to customize the module configuration page9. Support RFC2217-like protocol, be able to communicate with devices whose serial setting (baudrate, data bit, etc.) may change10. KeepAlive mechanism, detects broken connection, auto re-connecting11. Support time-out reboot (no-data reboot), ensures a long-term stable connection, configurable reboot time12. Support DNS domain name resolution, configurable DNS server13. Support DHCP, auto-obtained IP or static IP14. Firmware is upgradable via the network15. Restore to factory settings via software and/or hardware16. Comes with default MAC address, which is customizable17. Provided software: module configuration software, TCP/UDP testing tool, VCOM virtual serial port software18. Example code: host computer (socket ), VB, C++, Delphi, Android, iOS, etc.Specifications1. Ethernet:- Connector: 4-pin RJ45- Communication rate: 10/100Mbps- Interface protection: 1.5KV electromagnetic isolation- Protocols: IP, TCP, UDP, ARP, ICMP, DHCP, DNS, HTTPD Client- TX cache: 6Kbyte- RX cache: 4Kbyte2. RS485:- Connector: screw terminal (A+, B-, GND)- Data bit: 5bit, 6bit, 7bit, 8bit- Stop bit: 1, 2- Parity bit: None, Odd, Even, Mark, Space- Baudrate: 600bps~230.4Kbps- RX cache: 800byte- Hardware flow control: none- Interface protection:- 2KV ESD protection- RS485 pull up/down registers: 2.2KΩ3. Power:- Power supply: 5.0~7.0V (5V recommended)- Operating current: 150mA (@5V)- Power consumption: <1W- Interface protection: reverse-proof, ESD protection, anti-surge4. Environment:- Operating temperature: -25~75 degree C- Storage temperature: -40~105 degree C5. Size: 69.65*63.59*25.47mmPackage Contents1. RS485 TO ETH x12. 5V power adapter x1Specification: Package Weight One Package Weight 0.22kgs / 0.49lb One Package Size 8cm * 7cm * 3cm / 3.15inch * 2.76inch * 1.18inch Qty per Carton 455 Carton Weight 121.94kgs / 268.83lb Carton Size 56cm * 35cm * 39cm / 22.05inch * 13.78inch * 15.35inch Loading Container 20GP: 348 cartons * 455 pcs = 158340 pcs40HQ: 809 cartons * 455 pcs = 368095 pcs
£ 44.99 GBP
-
Waveshare 4G / 3G / 2G / GSM / GPRS / GNSS HAT for Raspberry Pi, LTE CAT4, for Southeast Asia, West Asia, Europe, Africa, 4G / 3G / 2G / GSM / GPRS / GNSS HAT
4G/3G/GNSS HAT for Raspberry Pi, Based on SIM7600E-HApplicable Region1. SIM7600A-H is mainly applicable in North America (US, CA, MX), SIM7600E-H is mainly applicable in Southeast Asia, West Asia, Europe, Africa, SIM7600CE-T is mainly applicable in China.2. Please check the supported bands according to your local service provider, select the proper one when placing order.Overview1. The SIM7600A-H 4G HAT is a 4G communication and GNSS positioning module, which supports LTE CAT4 up to 150Mbps for downlink data transfer. it is pretty low power consumption.2. You can connect this 4G module with computer to surf the Internet, or attach it onto Raspberry Pi to enable functions like 4G high speed connection, wireless communication, making telephone call, sending SMS, global positioning, etc.Features1. Raspberry Pi connectivity, compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+2. Support dial-up, telephone call, SMS, MMS, mail, TCP, UDP, DTMF, HTTP, FTP, etc.3. Support GPS, BeiDou, Glonass, LBS base station positioning4. Onboard USB interface, to test AT Commands, get GPS positioning data, and so on5. Onboard CP2102 USB to UART converter, for serial debugging6. Breakout UART control pins, to connect with host boards like Arduino/STM327. SIM card slot, supports 1.8V/3V SIM card8. Onboard audio jack and audio decoder for making telephone call9. 2x LED indicators, easy to monitor the working status10. Onboard voltage translator, operating voltage can be configured to 3.3V or 5V via jumper11. Baudrate: 300bps ~ 4Mbps (default: 115200bps)12. Autobauding baudrate: 9600bps ~ 115200bps13. Control via AT commands (3GPP TS 27.007, 27.005, and V.25TER command set)14. Support SIM application toolkit: SAT Class 3, USAT15. Come with development resources and manual (examples for Raspberry Pi/Arduino/STM32)Communications Specifications1. Band: - LTE-- SIM7600A-H: --- LTE-FDD B2/B4/B12-- SIM7600E-H: --- LTE-FDD B1/B3/B5/B7/B8/B20--- LTE-TDD B38/B40/B41-- SIM7600CE-T: --- LTE-TDD B38/B39/B40/B41--- LTE-FDD B1/B3/B8- WCDMA / TD-SCDMA / CDMA 2000-- SIM7600A-H: --- UMTS/HSPA+ B2/B5-- SIM7600E-H: --- UMTS/HSPA+ B1/B5/B8-- SIM7600CE-T:--- UMTS/HSDPA/HSPA+ B1/B8--- TD-SCDMA B34/B39 --- CDMA 1X/EVDO BC0- GSM/GPRS/EDGE 900/1800 MHz2. Generation: 4G, 3G, 2.5G, 2G3. Emitting power: 0.25W, 0.5W@EGSM900, 0.4W@DCS1800, 2W@GSM900, 1W@DCS18004. Data Speed- LTE CAT 4-- Uplink=<50 Mbps-- Downlink=<150 Mbps- UMTS-- Uplink=<384Kbps-- Downlink=<384Kbps- EDGE-- Uplink=<236.8kbps-- Downlink=<236.8kbps- GPRS-- Uplink=<85.6kbps-- Downlink=<85.6kbps- HSPA+-- Uplink=<5.76Mbps-- Downlink=<42MbpsGNSS Specifications1. Receiver type- 16-channel- C/A code2. Sensitivity- Tracking: -159 dBm (GPS) / -158 dBm (GLONASS) / TBD (BD)- Cold starts: -148 dBm3. Time-To-First-Fix (open air)- Cold starts: <35s- Hot starts: <1s4. Accuracy- Position: <2.5m CEPSMS and Audio Specifications1. SMS- Support types: MT, MO, CB, Text, PDU- Storage: USIM card and ME (default)2. Audio feature- Support echo cancellation- Support noise reductionOther Specifications1. Power supply: 5V2. Operating voltage: 5V/3.3V (configured via jumper)3. Operating temperature: -30 degree C ~ 80 degree C4. Storage temperature: -45 degree C ~ 90 degree C5. Dimension: 56.21mm x 65.15mmWhat is on Board1. SIM7600E-H2. CP2102 USB to UART converter3. NAU8810 audio decoder4. TXS0108EPWR voltage translator: translates 3.3V/5V into 1.8V5. MP2128DT power chip6. MP1482 power chip7. Raspberry Pi GPIO header: for connecting with Raspberry Pi8. SIM7600 control interface: for connecting with host boards like Arduino/STM329. SIM card slot: supports 1.8V/3V SIM card10. TF card slot: allows file/SMS/... storage11. 3.5mm earphone/mic jack12. USB interface: for testing AT Commands, getting GPS positioning data, etc.13. USB to UART interface: for serial debugging, or login to Raspberry Pi14. MAIN antenna connector15. AUX antenna connector16. GNSS antenna connector17. Power switch18. Network status indicator19. Power indicator20. Operating voltage selection jumper: - VCCIO - 3.3V: set operating voltage as 3.3V- VCCIO - 5V: set operating voltage as 5V21. UART selection jumper: - A: Access Raspberry Pi via USB to UART- B: Control the SIM7600 by Raspberry Pi- C: Control the SIM7600 via USB to UARTPackage Contents1. SIM7600E-H 4G HAT x12. LTE Antenna x13. GPS External Antenna (B) x14. USB type A plug to micro plug cable x25. RPi screws pack (2pcs) x1Specification: Package Weight One Package Weight 0.25kgs / 0.55lb One Package Size 15cm * 8cm * 3cm / 5.91inch * 3.15inch * 1.18inch Qty per Carton 260 Carton Weight 68.38kgs / 150.75lb Carton Size 60cm * 40cm * 39cm / 23.62inch * 15.75inch * 15.35inch Loading Container 20GP: 284 cartons * 260 pcs = 73840 pcs40HQ: 661 cartons * 260 pcs = 171860 pcs
£ 92.99 GBP
-
Waveshare GSM/GPRS/GNSS/Bluetooth HAT for Raspberry Pi, GSM/GPRS/GNSS/Bluetooth HAT
GSM/GPRS/GNSS/Bluetooth HAT for Raspberry Pi, Based on SIM868Overview1. This is a handy, low power Raspberry Pi HAT which features multi communication functionalities: GSM, GPRS, GNSS and Bluetooth.2. It allows your Pi to easily make a telephone call, send messages, connect to wireless Internet, global position, transfer data via Bluetooth, and so on.Features1. Raspberry Pi connectivity, compatible with Raspberry Pi 2B/3B/3B+/Zero/Zero W2. Support SMS, phone call, GPRS, DTMF, HTTP, FTP, MMS, email, etc.3. Support GPS, COMPASS, Glonass, LBS base station positioning, omni-positioning4. Bluetooth 3.0, supports data transferring through Bluetooth5. Onboard USB TO UART converter CP2102 for UART debugging6. 6x LEDs for indicating the module working status7. SIM card slot for 1.8V/3V SIM card8. RTC with backup battery holder9. Baudrate auto detection (1200bps ~115200bps)10. Control via AT commands (3GPP TS 27.007, 27.005, and SIMCOM enhanced AT Commands)11. Support SIM application toolkit: GSM 11.14 Release 9912. Come with development resources and manual (examples for Raspberry Pi/Arduino/STM32)GSM/GPRS1. Band- GSM 850/EGSM 900/DCS 1800/PCS 1900 MHz- Quad-band auto search- Compliant to GSM phase 2/2+2. Emitting power- Class 4 (2W @ GSM 850/EGSM 900 MHz)- Class 1 (1W @ DCS 1800/PCS 1900 MHz)4. GPRS connectivity- GPRS multi-slot class 12 (default)- GPRS multi-slot class 1~12 (configurable)5. GPRS data feature- Downlink speed: max 85.6kbps- Uplink speed: max 85.6kbps- Coding schemes: CS-1\CS-2\CS-3\CS-4- Support PAP (Password Authentication Protocol) for PPP connection- Support PBCCH- Support USSD6. SMS- Support: MT/MO/CB/Text/PDU mode- SMS storage: SIM card7. Audio- Voice encode/decode mode: Half Rate\Full Rate\Enhanced Full Rate\Adaptive muti rate- Support echo cancellation- Support noise reductionGNSS1. Receiver type- 33 tracking channels- 99 acquisition channels- GPS L1 C/A code2. Sensitivity- Tracking: -165 dBm- Cold starts: -148 dBm3. Time-To-First-Fix- Cold starts: 28s (typ.)- Hot starts: < 1s- Warm starts: 26s4. Accuracy- Horizontal position: <2.5m CEPBluetooth1. Integrates AT commands2. Compliant to Bluetooth specification3.0 + EDR3. Support SPP, OPP, HFP/HSP, etc.Misc1. Operating voltage: 5V2. Operating temperature: -40 degree C ~ 85 degree C3. Storage temperature: -45 degree C ~ 90 degree C4. Dimensions: 30.2mm x 65mmWhat is on Board1. SIM868 module2. ZMM5V1: Regulator diode3. SMF05C: TVS diode4. CP2102: USB TO UART converter5. MP1482: Power chip6. NDC7002N: Voltage level translator7. GPS status indicator8. NET indicator:- Flashes fast when the module starts up- Flashes slowly after GSM register succeed9. STA module working status indicator10. SIM868 UART Tx/Rx indicator11. Power indicator12. SIM868 control button: press the button and hold for 1s, to startup/shutdown the SIM86813 .Raspberry Pi GPIO connector14. SIM card slot15. USB TO UART interface16. 3.5mm earphone/mic jack17. GNSS antenna connector18. Bluetooth antenna connector19. GSM antenna connector20. CR1220 battery holder: for RTC backup battery21. UART selection switch- A: Control the SIM868 through USB TO UART- B: Control the SIM868 through Raspberry Pi- C: Access Raspberry Pi through USB TO UARTPackage Contents1. GSM/GPRS/GNSS HAT x12. GSM Antenna x13. GPS External Antenna (B) x14. Bluetooth Antenna x15. USB type A plug to micro plug cable x16. RPi screws pack (2pcs) x1Specification: Package Weight One Package Weight 0.19kgs / 0.41lb One Package Size 14cm * 8cm * 3cm / 5.51inch * 3.15inch * 1.18inch Qty per Carton 260 Carton Weight 15.00kgs / 33.07lb Carton Size 56cm * 40cm * 39cm / 22.05inch * 15.75inch * 15.35inch Loading Container 20GP: 305 cartons * 260 pcs = 79300 pcs40HQ: 708 cartons * 260 pcs = 184080 pcs
£ 38.99 GBP
-
Waveshare USB TO RS232 / RS485 / TTL Industrial Isolated Converter
OverviewThis is an industrial USB to RS232/485/TTL isolated converter with original FT232RL inside. It features embedded protection circuits such as power isolation, ADI magnetical isolation, and TVS diode, etc. Whats more, the USB TO RS232/485/TTL comes with an aluminium alloy enclosure, make it solid and durable to work.The USB TO RS232/485/TTL is very easy to use, fully automatic transceiving without delay. Due to its fast communication, stability, reliability, and safety, it is an ideal choice for industrial control equipments and/or applications with high communication requirement.Features1. USB TO RS232, USB TO RS485, USB TO TTL (UART)2. Adopt original FT232RL, fast communicating, stable and reliable, better compatibility3. Onboard unibody power supply isolation, provides stable isolated voltage, needs no extra power supply for the isolated terminal4. Onboard unibody magnetical isolation, allows signal isolation, high reliability, strong anti-interference, low power consumption5. Onboard TVS (Transient Voltage Suppressor), effectively suppress surge voltage and transient spike voltage in the circuit, lightning-proof & anti-electrostatic6. Onboard self-recovery fuse and protection diodes, ensures the current/voltage stable outputs, provides over-current/over-voltage proof, improves shock resistance7. Fully automatic transceiver circuit with no delay, ensures the USB port communicates with different interfaces fastly and stably, without interfering each other8. Onboard TTL serial 3.3V/5V voltage translator, config the TTL level via switch9. Aluminium alloy enclosure with sand blasting and anodic oxidation, CNC process opening, solid and durable10. 3 LEDs for indicating the power and transceiver status11. High quality USB-B and RS232 connectors, smoothly plug/pullSpecifications1. Product type: industrial optically isolated converter2. Baudrate: 300-921600bps3. Host port: USB4. Device port: RS485/RS232/TTL5. USB:- Operating voltage: 5V- Connector: USB-B- Protection: 200mA self-recovery fuse, isolated output- Transmission distance: ~5m6. RS485:- Connector: screw terminal- Pins: A+, B-, GND- Direction control: hardware automatic control- Protection: 600W lightning-proof and surge-suppress, 15KV ESD protection (reserved 120R balancing resistor solder pads)- Transmission distance: ~1200m- Transmission mode: point-to-multipoints (up to 32 nodes, it is recommended to use repeaters for 16 nodes or more)7. RS232:- Connector: DR9 male- Protection: TVS diode, surge protection, ESD protection- Transmission distance: ~15m- Transmission mode: point-to-point8. TTL (UART):- Operating voltage: 3.3V/5V- Connector: screw terminal- Pins: TXD, RXD, GND- Protection: clamp protection diode, over-voltage/negative-voltage proof, shock resistance- Transmission mode: point-to-point9. LED indicators:- PWR: red power indicator, light up when there is USB connection and voltage is detected- TXD: green TX indicator, light up when the USB port sends data- RXD: blue RX indicator, light up when the device ports send data back10. Operating environment:- Temperature: -15℃ ~ 70℃- Humidity: 5%RH ~ 95%RH11. Operating system: Windows 10 / 8.1 / 8 / 7 / XP12. Package contents:- USB TO RS232/485/TTL x1- USB cable x1Specification: Package Weight One Package Weight 0.29kgs / 0.64lb One Package Size 10cm * 9cm * 5cm / 3.94inch * 3.54inch * 1.97inch Qty per Carton 192 Carton Weight 15.00kgs / 33.07lb Carton Size 60cm * 36cm * 40cm / 23.62inch * 14.17inch * 15.75inch Loading Container 20GP: 308 cartons * 192 pcs = 59136 pcs40HQ: 716 cartons * 192 pcs = 137472 pcs
£ 34.99 GBP
-
Waveshare Din Rail RS485 to RJ45 Serial Server with POE Function
1. Power supply: 9-24V2. Communication interface: RS485 port x 1, Ethernet port x 13. Baud rate: 300-115200 bps4. Data bits: 5-9 bits5. Configuration: host, web browser, device management function library6. Communication method: TCP/IP direct communication, VCOM7. Working temperature: -40 degrees to 85 degrees8. Main function: Bidirectional transparent data transmission between RS485 and Ethernet9. It is easy to combine multi-rail installed serial servers together, more freedom.10. It is suitable for Modbus grid upgrade and can be used in conjunction with 3D configuration software.11. Support TCP server / TCP client / UDP mode / UDP multicast.12. Multi-host rolling polling support, easy for cloud communication and device identification.Specification: Package Weight One Package Weight 0.14kgs / 0.30lb One Package Size 12cm * 8cm * 6cm / 4.72inch * 3.15inch * 2.36inch Qty per Carton 100 Carton Weight 16.00kgs / 35.27lb Carton Size 50cm * 42cm * 32cm / 19.69inch * 16.54inch * 12.6inch Loading Container 20GP: 396 cartons * 100 pcs = 39600 pcs40HQ: 921 cartons * 100 pcs = 92100 pcs
£ 34.99 GBP
-
Waveshare Industrial 5P Gigabit Ethernet Switch, Full-Duplex 10/100/1000M, DIN Rail Mount
Features1. Onboard switch chip, 5x ports 10/100/1000M non-blocking switch architecture 2. Full-duplex 10/100/1000M support for each port (the half-duplex 100M connection is only supported on 10/100M mode) 3. Full/Half-duplex operations with IEEE 802.3x flow control and back pressure support 4. Allow forwarding 9216 bytes huge data packet on linear speed 5. Over-voltage protection, effectively preventing damages caused by other high voltage power supply 6. Industrial grade alloy case, solid and durable, with DIN rail mount support for easy installing 7. 5~36V wide voltage power supply, dual power interface (DC interface and terminal block) onboard overvoltage protection, reverse connection protection. 8. Support 25mm standard rail.Package List1. Gigabit-Switch-5P x 1 2. Power supply screw terminal x 1 3. 12V 1A power adapter x 1Specification: Package Weight One Package Weight 0.24kgs / 0.52lb One Package Size 15cm * 12cm * 5cm / 5.91inch * 4.72inch * 1.97inch Qty per Carton 80 Carton Weight 18.50kgs / 40.79lb Carton Size 50cm * 52cm * 32cm / 19.69inch * 20.47inch * 12.6inch Loading Container 20GP: 320 cartons * 80 pcs = 25600 pcs40HQ: 744 cartons * 80 pcs = 59520 pcs
£ 35.99 GBP
-
Waveshare PoE UPS Base Board for Raspberry Pi CM4, Gigabit Ethernet, Dual HDMI, Quad USB2.0, PoE UPS Base Board
Features1. PoE UPS Base For CM4: Uninterruptible power supply, powering the CM4 while recharging 2. Connecting With Compute Module 4: Standard CM4 socket and color-coded Raspberry Pi 40PIN GPIO header. Suitable For Compute Module 4 Lite/EMMC Series Module 3. Uninterruptible Power: It is able to charge the batteries and provide power output for the system at the same time from external power supply. Automatically switch over to batteries output if external power supply is unavailable, keeps the system running without any trouble 4. Multi Power Supply Options: - Three external power supply options: USB interface, wide voltage DC, and PoE - When connected to the external power supply, the system will be powered and the battery will be charged at the same time, and the battery will be in a disconnected status after being fully charged, so as to avoid battery life damaging caused by frequently charging and discharging - When the external power supply is insufficient, the battery will provide power output together with the external power supply at the same time to ensure system normal operation - When the external power supply is connected, the system will keep running normally even when the battery fails or is taken out. When the external power supply is disconnected, it will automatically switch over to batteries output without interrupting the system operation 5. Safe And Stable Circuit Design: Protection circuits for over charge/discharge, over current, short circuit, and reverse-proof along with the standalone resettable fuse for each battery, more safe and stable 6. Real Time Monitoring: Monitoring the batteries voltage, current, power, and remaining capacity via I2C. (When the voltage dips too low, it is possible to save files properly and then shutdown the system by software, to avoid any data loss) Note: The 18650 batteries are not includedSpecifications1. CM4 socket: Suitable for all variants of Compute Module 4 2. Battery support: Parallel 18650 Li-ion battery x 3 (NOT included) 3. Networking: Gigabit Ethernet RJ45 connector, integrates 802.3af-compliant PoE circuit (5V/2.5A) 4. USB: USB 2.0 Type A ?? 4 5. Connector: - Raspberry Pi 40PIN GPIO header - M.2 M KEY slot, for connecting NVME SSD, or communication module with PCIE M.2 M KEY interface 6. Display: MIPI DSI port x 1 (22pin 0.5mm FPC connector) 7. Camera: MIPI CSI-2 port x 2 (22pin 0.5mm FPC connector) 8. Video: HDMI x 2, supports 4K 30fps output 9. RTC: Real-time clock with battery socket and ability to wake Compute Module 4 10. Storage: MicroSD card socket for Compute Module 4 Lite (without eMMC) variants 11. Fan: Allows speed adjustment and measurement, 5V / 12V 12. Indicator: - M.2 status LED - CM4 status LED 13. Power input7-36V 14. Dimensions: 175.0 x 108.0mmSpecification: Package Weight One Package Weight 0.17kgs / 0.37lb One Package Size 15cm * 12cm * 3cm / 5.91inch * 4.72inch * 1.18inch Qty per Carton 100 Carton Weight 16.00kgs / 35.27lb Carton Size 52cm * 35cm * 37cm / 20.47inch * 13.78inch * 14.57inch Loading Container 20GP: 396 cartons * 100 pcs = 39600 pcs40HQ: 919 cartons * 100 pcs = 91900 pcs
£ 82.99 GBP
-
Waveshare Solar Power Manager, Embedded 10000mAh Li-Po Battery, Support 6V~24V Solar Panels, 19799
FeaturesThe Solar Power Manager (B) is compatible with general 6V~24V solar panels. It can recharge the 3.7V rechargeable Li-po battery through solar panel or USB TYPE-C connection, and provides 5V / 3A regulated output (with multi protocols support including PD/QC/FCP/PE/SFCP). The module features MPPT (Maximum Power Point Tracking) function and multi protection circuits, therefore, it is able to keep operating with high-efficiency, stability, and safety. It is suitable for solar powered, low-power IoT, and other environmental protection projects. 1. Support MPPT (Maximum Power Point Tracking) function, maximizing the efficiency of the solar panel 2. Flexible battery recharging: from solar panel or USB TYPE-C power adapter 3. Compatible with 6V~24V solar panels, DC-002 jack input or screw terminal input 4. Onboard MPPT SET switch, select the level closed to input level to improve recharging efficiency 5. Onboard aluminum electrolytic capacitor and SMD ceramic capacitor, reducing the ripple, stable performance 6. PH2.0 battery connector, with embedded 10000mAh 3.7V rechargeable Li-po battery 7. Several LED indicators, for monitoring the status of solar panel and battery 8. Multi protection circuits: over charge / over discharge / reverse-proof / over heat / over current, stable and safe to useSpecification: Package Weight One Package Weight 0.35kgs / 0.77lb One Package Size 20cm * 15cm * 5cm / 7.87inch * 5.91inch * 1.97inch Qty per Carton 40 Carton Weight 13.00kgs / 28.66lb Carton Size 42cm * 32cm * 27cm / 16.54inch * 12.6inch * 10.63inch Loading Container 20GP: 734 cartons * 40 pcs = 29360 pcs40HQ: 1705 cartons * 40 pcs = 68200 pcs
£ 34.99 GBP
-
Waveshare Solar Power Manager (C)
Safety Cautions1. Li-ion and Li-po batteries are quite unstable. They may cause fire, personal injury, or property damage, if they are not properly recharged or used. 2. Do not reversely connect the polarities when recharging or discharging the battery. Do not use inferior charger/charging panel to recharge the battery. 3. Do not mix use old batteries with new ones, avoid using batteries of different brands. 4. When buying lithium battery, should make sure the battery specification is compatible with the expansion board. Choose batteries from formal manufacturer, and ensure the batteries will work stably and safely by aging test. 5. Lithium batteries have limited cycle life, they will also deteriorate as time goes by. Should be replaced with new ones when the batteries reaching their max cycle life, or working over two years, whichever comes first. 6. Should be placed carefully and properly, keep it away from inflammables and explosives articles, away from children, avoid any safety accident caused by careless storage.FeaturesThe Solar Power Manager (C) is compatible with general 6V~24V solar panels. It can recharge the 18650 rechargeable Li-ion batteries through solar panel or USB TYPE-C connection, and provides 5V / 3A regulated output (with multi protocols support including PD/QC/FCP/PE/SFCP). The module features MPPT (MAX Power Point Tracking) function and multi protection circuits, therefore, it is able to keep operating with high-efficiency, stability, and safety. It is suitable for solar powered, low-power IoT, and other environmental protection projects. 1. Support MPPT (MAX Power Point Tracking) function, MAX the efficiency of the solar panel 2. Flexible battery recharging: from solar panel or USB TYPE-C power adapter 3. Compatible with 6V~24V solar panels, DC-002 jack input or screw terminal input 4. Onboard MPPT SET switch, select the level closed to input level to improve recharging efficiency 5. Onboard aluminum electrolytic capacitor and SMD ceramic capacitor, reducing the ripple, stable performance 6. Embedded battery holder, supports 3x 18650 rechargeable Li-ion batteries 7. Several LED indicators, for monitoring the status of solar panel and battery 8. Multi protection circuits: over charge / over discharge / reverse-proof / over heat / over current, stable and safe to useSpecifications1. Solar in: 6V ~ 24V (18V by default) 2. Recharging: Solar panel, power adapter, USB 3. Battery: 3 x 18650 Li-ion battery (Not included) 4. USB input: 5V (Type-C, with PD quick charge support) 5. 5V output: 5V / 3A (USB-out, Type-C) 6. Recharging cutoff voltage: 4.2V +/- 1% 7. Over discharge protection voltage: 3.0V +/- 1% 8. Solar panel recharging effeciency: ~78% 9. USB recharging effeciency: ~93% 10. Batteries boost out effeciency: ~92% 11. Case: Metal case 12. Size: 119.0 x 71.0 x 25.2mm 13. Package list: - Solar Power Manager (C) x1 - Adapter x1Specification: Package Weight One Package Weight 0.24kgs / 0.54lb One Package Size 20cm * 15cm * 5cm / 7.87inch * 5.91inch * 1.97inch Qty per Carton 40 Carton Weight 9.00kgs / 19.84lb Carton Size 42cm * 32cm * 27cm / 16.54inch * 12.6inch * 10.63inch Loading Container 20GP: 734 cartons * 40 pcs = 29360 pcs40HQ: 1705 cartons * 40 pcs = 68200 pcs
£ 27.99 GBP
-
Waveshare Industrial USB to RS485 Converter
About The ProductOverview 1. This is an industrial USB to RS485 converter with original FT232RL and SP485EEN inside. It features embedded protection circuits such as lightningproof, resettable fuse, ESD protection, and TVS diode, etc. It is pretty small in size. 2. The USB TO RS485 is very easy to use, allows automatic transceiving. Due to its fast communication, stability, reliability, and safety, it is an ideal choice for industrial control equipments and/or applications with high communication requirement. Features 1. USB to RS485 communication 2. Adopt original FT232RL and SP485EEN, fast communicating, stable and reliable, better compatibility 3. Onboard TVS (Transient Voltage Suppressor), effectively suppress surge voltage and transient spike voltage in the circuit, lightningproof & anti-electrostatic 4. Onboard self-recovery fuse and protection diodes, ensures the current/voltage stable outputs, provides over-current/over-voltage proof, improves shock resistance 5. 3 LEDs for indicating the power and transceiver status Specifications 1. Product type: Industrial converter 2. Baudrate: 300-921600bps 3. Host port: USB 4. Device port: RS485 5. USB: - Operating voltage: 5V - Connector: USB-A - Protection: 200mA self-recovery fuse, ESD protection - Transmission distance: about 5m 6. RS485: - Connector: screw terminal - Pins: A+, B-, GND - Direction control: hardware automatic control - Protection: 600W lightningproof and surge-suppress, 15KV ESD protection (onboard 120R balancing resistor) - Transmission distance: about 1200m (low rate) - Transmission mode: point-to-multipoints (up to 32 nodes, it is recommended to use repeaters for 16 nodes or more) 7. LED indicators: - PWR: red power indicator, light up when there is USB connection and voltage is detected - TXD: red TX indicator, light up when the USB port sends data - RXD: red RX indicator, light up when the device ports send data back 8. Operating environment: - Temperature: -15 ~ 70 degree - Humidity: 5%RH ~ 95%RH 9. Operating system: Mac, Linux, Android, WinCE, Windows 10 / 8.1 / 8 / 7 / XPPackage List1. USB TO RS485 x 1 2. USB-A male to female cable x 1 3. Screwdriver x 1
£ 17.99 GBP
-
Waveshare PoE UPS Base Board for Raspberry Pi CM4, Gigabit Ethernet, Dual HDMI, Quad USB2.0
Features1. PoE UPS Base For CM4: Uninterruptible power supply, powering the CM4 while recharging 2. Connecting With Compute Module 4: Standard CM4 socket and color-coded Raspberry Pi 40PIN GPIO header. Suitable For Compute Module 4 Lite/EMMC Series Module 3. Uninterruptible Power: It is able to charge the batteries and provide power output for the system at the same time from external power supply. Automatically switch over to batteries output if external power supply is unavailable, keeps the system running without any trouble 4. Multi Power Supply Options: - Three external power supply options: USB interface, wide voltage DC, and PoE - When connected to the external power supply, the system will be powered and the battery will be charged at the same time, and the battery will be in a disconnected status after being fully charged, so as to avoid battery life damaging caused by frequently charging and discharging - When the external power supply is insufficient, the battery will provide power output together with the external power supply at the same time to ensure system normal operation - When the external power supply is connected, the system will keep running normally even when the battery fails or is taken out. When the external power supply is disconnected, it will automatically switch over to batteries output without interrupting the system operation 5. Safe And Stable Circuit Design: Protection circuits for over charge/discharge, over current, short circuit, and reverse-proof along with the standalone resettable fuse for each battery, more safe and stable 6. Real Time Monitoring: Monitoring the batteries voltage, current, power, and remaining capacity via I2C. (When the voltage dips too low, it is possible to save files properly and then shutdown the system by software, to avoid any data loss) Note: The 18650 batteries are not includedSpecifications1. CM4 socket: Suitable for all variants of Compute Module 4 2. Battery support: Parallel 18650 Li-ion battery x 3 (NOT included) 3. Networking: Gigabit Ethernet RJ45 connector, integrates 802.3af-compliant PoE circuit (5V/2.5A) 4. USB: USB 2.0 Type A ?? 4 5. Connector: - Raspberry Pi 40PIN GPIO header - M.2 M KEY slot, for connecting NVME SSD, or communication module with PCIE M.2 M KEY interface 6. Display: MIPI DSI port x 1 (22pin 0.5mm FPC connector) 7. Camera: MIPI CSI-2 port x 2 (22pin 0.5mm FPC connector) 8. Video: HDMI x 2, supports 4K 30fps output 9. RTC: Real-time clock with battery socket and ability to wake Compute Module 4 10. Storage: MicroSD card socket for Compute Module 4 Lite (without eMMC) variants 11. Fan: Allows speed adjustment and measurement, 5V / 12V 12. Indicator: - M.2 status LED - CM4 status LED 13. Power input7-36V 14. Dimensions: 175.0 x 108.0mm
£ 89.99 GBP
-
Waveshare SX1268 LoRa HAT 470MHz Frequency Band for Raspberry Pi, Applicable for China
Overview1. This is a Raspberry Pi LoRa HAT based on SX1268, covers 470MHz frequency band. It allows data transmission up to 5km through serial port.2. By utilizing the new generation LoRa spread spectrum modulation technology, the communication distance of the module is as long as 5km, also supports auto repeating to transmit longer. Other features include Wake on Radio, wireless config, carrier sensing, communication key, and so on.3. Comparing with normal LoRa modules, the SX1268 LoRa HAT achieves longer communication distance, higher rate, lower consumption, better safety and anti-interference. It is suitable for various applications such as industrial control, smart home, data collection, etc.Features1. Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards2. Onboard CP2102 USB TO UART converter, for serial debugging3. Brings the UART control interface, for connecting host boards like Arduino/STM324. 4x LED indicators, easy to check the module status5. LoRa spread spectrum modulation technology, up to 84 available signal channel, longer communication distance, more robust to interference6. Auto multi-level repeating, suit for ultra long range communication, allows multi network on the same region7. Low power consumption features like deep sleeping and Wake on Radio, ideal for battery-powered applications8. Customizable communication key which wont be retrieved, greatly improves the security of user data9. Support LBT, monitoring the signal channel noise before transmitting, greatly improves the success ratio under extreme environment10. Support RSSI signal intensity indicating, for evaluating signal quality, tuning the network11. Support wireless parameter configuration, by sending wireless command/data packet, remotely configure or retrieve the module parameter12. Support fixed-point transmission, broadcast, signal channel monitor13. Come with development resources and manual (examples for Raspberry Pi/STM32)What is on Board1. SX1268 LoRa module2. 74HC125V: voltage level translator3. CP2102: USB TO UART converter4. Raspberry Pi GPIO connector: for connecting with Raspberry Pi5. USB TO UART port6. UART header: for connecting host boards like STM32/Arduino7. SMA antenna connector8. IPEX antenna connector9. Indicators:- RXD/TXD: UART RX/TX indicator- AUX: auxiliary indicator- PWR: power indicator10. UART selection jumpers- A: Control the LoRa module through USB TO UART- B: Control the LoRa module through Raspberry Pi- C: Access Raspberry Pi through USB TO UART11. LoRa mode selection jumpers- Short M0, short M1: Transmission mode- Short M0, open M1: Configuration mode- Open M0, short M1: WOR mode- Open M0, open M1: deep sleep modeSpecification1. RF module: SX12682. Frequency band: 410.125 ~ 493.125MHz3. Radio rate: 0.3kbps ~ 62.5kbps (programmable)4. Transmit power: 22.0dBm (10/13/17/22dBm programmable)5. Receive sensitivity: -147dBm (radio rate 2.4kbps)6. Power consumption: - Transmit current: 110mA (transient consumption)- Receive current: 11mA- Sleep current: 2uA (LoRa module software shutoff)7. Communication interface: UART (TTL level)8. Baudrate: 1200bps ~ 115200bps (9600bps by default)9. Packet length: 240 Byte (32/64/128/240 Byte programmable)10. Cache: 1000 Byte11. Experimental range: 5km (condition: cloudless and wild, altitude 2.5m, antenna gain 5dBi, radio rate 2.4kbps)12. Power supply: 5V13. Logic level: 3.3V/5V14. Operating temperature: -40~85 degree C15. Applications: Smart home, industrial sensors, building automation, smart meters, and more other IoT applications16. Dimensions: 7cm x 12cm x 2cm17. Weight: 69g18. Packing List:- SX1268 470M LoRa HAT x1- USB type A plug to micro plug cable x1- 470MHz antenna x1Specification: Package Weight One Package Weight 0.09kgs / 0.19lb One Package Size 15cm * 8cm * 2cm / 5.91inch * 3.15inch * 0.79inch Qty per Carton 400 Carton Weight 15.00kgs / 33.07lb Carton Size 60cm * 40cm * 40cm / 23.62inch * 15.75inch * 15.75inch Loading Container 20GP: 277 cartons * 400 pcs = 110800 pcs 40HQ: 644 cartons * 400 pcs = 257600 pcs
£ 33.99 GBP
-
Waveshare Isolated RS485 CAN HAT For Raspberry Pi
1. Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards2. 1-Ch CAN, adopts MCP2515 controller and CAN transceiver, converts SPI to CAN3. 2-Ch RS485, adopts SC16IS752+SP3485 dual-chip combination, converts SPI to RS4854. Onboard power conversion circuit, supports 8~28V wide voltage power supply, can power the Raspberry Pi at the same time5. Onboard unibody power supply isolation, providing stable isolated voltage, no extra power supply required for the isolated terminal6. Onboard unibody digital isolation, for isolating the signal, reliable and jamproof, low power consumption7. Onboard TVS (Transient Voltage Suppressor), effectively suppress surge voltage and transient spike voltage in the circuit, lightningproof & anti-electrostatic8. Onboard resettable fuse and protection diodes, ensures the current/voltage stable outputs, provides over-current/over-voltage proof, improves shock resistance9. Onboard 120Ω terminal resistor, configured by jumper10. Onboard terminals and pin headers, more convenient connection11. Breakout SPI control pins, for connecting with host control boardsSpecification: Package Weight One Package Weight 0.20kgs / 0.45lb One Package Size 8cm * 6cm * 3cm / 3.15inch * 2.36inch * 1.18inch Qty per Carton 200 Carton Weight 41.00kgs / 90.39lb Carton Size 34cm * 32cm * 32cm / 13.39inch * 12.6inch * 12.6inch Loading Container 20GP: 765 cartons * 200 pcs = 153000 pcs 40HQ: 1778 cartons * 200 pcs = 355600 pcs
£ 34.99 GBP
You have seen 192 out of 193 products