DJI
-
For DJI Osmo Pocket 3 Original Camera Glass Lens, For DJI Osmo Action 5 Pro(Original)
1. For DJI Osmo Action 5 Pro camera glass lens replacement part. 2. Replace the old, broken, cracked, damaged one. 3. Make your device look more refreshing than ever. 4. Completely fit and work. 5. Each item has been checked and in good condition before shipping. 6. Professional installation is highly recommended. We will not be responsible once the screen is installed.Specification: Package Weight One Package Weight 0.02kgs / 0.04lb One Package Size 10cm * 5cm * 1cm / 3.94inch * 1.97inch * 0.39inch Qty per Carton 1000 Carton Weight 11.00kgs / 24.25lb Carton Size 30cm * 32cm * 32cm / 11.81inch * 12.6inch * 12.6inch Loading Container 20GP: 868 cartons * 1000 pcs = 868000 pcs40HQ: 2015 cartons * 1000 pcs = 2015000 pcs
£ 7.99 GBP
-
For DJI RS 3 Original LCD Screen, For DJI RS 3(Original)
About the product 1. Replacement main LCD screen for DJI RS 3 2. Replace the old, broken, cracked, damaged one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installed Before Installation Notes Tips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the device. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile device apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile device. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.Specification: General Compatible with DJI: RS 3 Package Weight One Package Weight 0.08kgs / 0.17lb One Package Size 25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch Qty per Carton 66 Carton Weight 4.70kgs / 10.36lb Carton Size 40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch Loading Container 20GP: 514 cartons * 66 pcs = 33924 pcs40HQ: 1194 cartons * 66 pcs = 78804 pcs
£ 21.99 GBP
-
For DJI RS 4 Original LCD Screen, For DJI RS 4(Original)
About the product 1. Replacement main LCD screen for DJI RS 4 2. Replace the old, broken, cracked, damaged one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installed Before Installation Notes Tips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the device. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile device apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile device. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.Specification: General Compatible with DJI: RS 4 Package Weight One Package Weight 0.08kgs / 0.17lb One Package Size 25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch Qty per Carton 66 Carton Weight 4.70kgs / 10.36lb Carton Size 40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch Loading Container 20GP: 514 cartons * 66 pcs = 33924 pcs40HQ: 1194 cartons * 66 pcs = 78804 pcs
£ 21.99 GBP
-
For DJI OSMO Action 2 Original Front LCD Secondary Screen with Digitizer Full Assembly, For DJI OSMO Action 2 (Original Secondary LCD)
Before Installation Notes Tips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the device. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means device apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in device. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display. About the product 1. Front LCD display + touch screen digitizer assembly replacement part For DJI OSMO Action 2 2. Replace your broken or unusable item with a new one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installedSpecification: General Compatible with DJI: Action 2 Package Weight One Package Weight 0.08kgs / 0.17lb One Package Size 25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch Qty per Carton 66 Carton Weight 4.60kgs / 10.14lb Carton Size 40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch Loading Container 20GP: 514 cartons * 66 pcs = 33924 pcs40HQ: 1194 cartons * 66 pcs = 78804 pcs
£ 17.99 GBP
-
For DJI Osmo Action 2 Original Rear Main LCD Screen with Digitizer Full Assembly, For DJI Osmo Action 2(Original)
About the product 1. Rear LCD display + touch screen with digitizer assembly replacement part for DJI OSMO Action 2 2. Replace your broken or unusable item with a new one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installed Before Installation Notes Tips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the device. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means device apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in device. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.Specification: General Compatible with DJI: Action 2 Package Weight One Package Weight 0.09kgs / 0.19lb One Package Size 25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch Qty per Carton 66 Carton Weight 5.30kgs / 11.68lb Carton Size 40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch Loading Container 20GP: 514 cartons * 66 pcs = 33924 pcs40HQ: 1194 cartons * 66 pcs = 78804 pcs
£ 26.99 GBP
-
For DJI Osmo Action 5 Pro Original Front Small LCD Screen Outer Glass Lens, For DJI Osmo Action 5 Pro(Original)
1. Front small LCD screen outer glass lens replacement part for DJI Osmo Action 5 Pro. 2. Replace your broken or unusable item with a new one. 3. Make your device look more refreshing than ever. 4. Completely fit and work. 5. Each item has been checked and in good condition before shipping. 6. Professional installation is highly recommended. We will not be responsible once the screen is installed.Specification: General Compatible with DJI: Osmo Action 5 Pro Package Weight One Package Weight 0.05kgs / 0.12lb One Package Size 21cm * 11cm * 5cm / 8.27inch * 4.33inch * 1.97inch Qty per Carton 110 Carton Weight 5.00kgs / 11.02lb Carton Size 40cm * 30cm * 25cm / 15.75inch * 11.81inch * 9.84inch Loading Container 20GP: 888 cartons * 110 pcs = 97680 pcs40HQ: 2063 cartons * 110 pcs = 226930 pcs
£ 10.99 GBP
-
For DJI Osmo Action 1 Original Main LCD Screen, For DJI Osmo Action(Original Main LCD)
About the product 1. Replacement main LCD screen for DJI Osmo Action 2. Replace the old, broken, cracked, damaged one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installed 7. Note: this is a main screen Before Installation Notes Tips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the device. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile device apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile device. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.Specification: General Compatible with DJI: Osmo Action Package Weight One Package Weight 0.08kgs / 0.17lb One Package Size 25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch Qty per Carton 66 Carton Weight 4.70kgs / 10.36lb Carton Size 40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch Loading Container 20GP: 514 cartons * 66 pcs = 33924 pcs40HQ: 1194 cartons * 66 pcs = 78804 pcs
£ 23.99 GBP
-
For DJI Osmo Action 4 Original Main LCD Screen, For DJI Osmo Action 4 / Action 3(Original Main LCD)
About the product 1. Replacement main LCD screen for DJI Osmo Action 4/Action 3 2. Replace the old, broken, cracked, damaged one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installed 7. Note: this is a main screen Before Installation Notes Tips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the device. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile device apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile device. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.Specification: General Compatible with DJI: Osmo Action 4, Osmo Action 3 Package Weight One Package Weight 0.08kgs / 0.17lb One Package Size 25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch Qty per Carton 66 Carton Weight 4.70kgs / 10.36lb Carton Size 40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch Loading Container 20GP: 514 cartons * 66 pcs = 33924 pcs40HQ: 1194 cartons * 66 pcs = 78804 pcs
£ 25.99 GBP
-
For DJI Osmo Pocket 3 Original Camera Sapphire Lens, For DJI Osmo Pocket 3(Original)
1. For DJI Osmo Pocket 3 camera lens replacement part. 2. Replace the old, broken, cracked, damaged one. 3. Make your device look more refreshing than ever. 4. Completely fit and work. 5. Each item has been checked and in good condition before shipping. 6. Professional installation is highly recommended. We will not be responsible once the screen is installed.Specification: General Compatible with DJI: Osmo Pocket 3 Package Weight One Package Weight 0.02kgs / 0.04lb One Package Size 10cm * 5cm * 1cm / 3.94inch * 1.97inch * 0.39inch Qty per Carton 1000 Carton Weight 11.00kgs / 24.25lb Carton Size 27cm * 27cm * 22cm / 10.63inch * 10.63inch * 8.66inch Loading Container 20GP: 1662 cartons * 1000 pcs = 1662000 pcs40HQ: 3859 cartons * 1000 pcs = 3859000 pcs
£ 8.99 GBP
-
For DJI OSMO Action 4 Original Back LCD Screen with Digitizer Full Assembly, For DJI OSMO Action 4 / Action 3(Original)
Before Installation Notes Tips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the device. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means device apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in device. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display. About the product 1. Front LCD display + touch screen digitizer assembly replacement part For DJI OSMO Action 4/Action 3 2. Replace your broken or unusable item with a new one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installedSpecification: General Compatible with DJI: Osmo Action 4, Osmo Action 3 Package Weight One Package Weight 0.09kgs / 0.20lb One Package Size 25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch Qty per Carton 66 Carton Weight 5.60kgs / 12.35lb Carton Size 40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch Loading Container 20GP: 514 cartons * 66 pcs = 33924 pcs40HQ: 1194 cartons * 66 pcs = 78804 pcs
£ 22.99 GBP
-
BRDRC For DJI Mini 3 / 3 Pro BRDRC Folding Heightened Landing Gear Training Rack, For DJI Mini 3 / 3 Pro
1. Effectively increase the height of the drone by 26mm, protecting the fuselage and gimbal from damage; 2. Can effectively improve the drone ability to adapt to the ground environment during takeoff and landing, and prevent ground debris from dirtying the fuselage or damaging the lens; 3. Lightweight and does not affect flight, portable and easy to travel; 4. Foldable tripod for easy storage. 5. Main material: ABS 6. Product size: 13.7 x 12.8x 6cm 7. Net weight: 17.9gSpecification: General Compatible with DJI: Mini 3, Mini 3 Pro Package Weight One Package Weight 0.06kgs / 0.13lb One Package Size 15cm * 8cm * 5.5cm / 5.91inch * 3.15inch * 2.17inch Qty per Carton 200 Carton Weight 12.50kgs / 27.56lb Carton Size 62cm * 42cm * 42cm / 24.41inch * 16.54inch * 16.54inch Loading Container 20GP: 243 cartons * 200 pcs = 48600 pcs40HQ: 566 cartons * 200 pcs = 113200 pcs
£ 17.99 GBP
-
BRDRC For DJI Mini 2 / Mavic Mini Air-Dropping System Thrower Parabolic, For DJI Mini 2 / Mavic Mini
1. Suitable for Mini 2 / Mavic Mini drones, can be remotely dispatched for advertising, throwing bait, throwing gifts, delivering meals, sending wedding rings, etc.; 2. Mini and easy to throw, allowing you to show more possibilities; 3. USB charging, quick release, one-button control of the remote control; 4. The installed weight is about 54g, light and safe; the integrated fuselage design will not increase the burden on the drone, nor will it damage the drone, so you can enjoy airdropping gifts; 5. The bottom landing gear is effectively increased by 3cm, and it can still take off and land in an uneven ground environment, effectively protecting the safety of the fuselage. Important parameters: 1. MAX load: 100g 2. Built-in battery capacity: 150 mAh 3. Standby time: about 12 hours 4. Charging time: 1.5 hours 5. Remote control distance: 100 meters 6. Charging interface: Type-C Other parameters: 1. Main material: plastic 2. Product size: 8.6 x 6.2 x 3.5cm (thrower), 3.8 x 5.8 x 1.5cm (remote control) 3. Net weight: 79g Packing list: 1. Thrower x 1 2. Remote control x 1 3. Heightened landing gear (set) x 1 4. Thrower charging cable x 1Specification: General Compatible with DJI: Mini 2, Mavic Mini Package Weight One Package Weight 0.16kgs / 0.35lb One Package Size 12cm * 9cm * 6cm / 4.72inch * 3.54inch * 2.36inch Qty per Carton 100 Carton Weight 14.80kgs / 32.63lb Carton Size 47cm * 32cm * 25cm / 18.5inch * 12.6inch * 9.84inch Loading Container 20GP: 709 cartons * 100 pcs = 70900 pcs40HQ: 1646 cartons * 100 pcs = 164600 pcs
£ 31.99 GBP
-
BRDRC BRDRC Air-Dropping System Drone Thrower Parabolic For DJI Mini 4 Pro / 3 Pro / Air 3 / Mavic 3 / 3 Pro, For DJI Mini 4 Pro / 3 Pro / Air 3 / Mavic 3 / 3 Pro
1. Can be delivered remotely, used for advertising, throwing bait, throwing gifts, delivering meals, delivering wedding rings, etc.; 2. USB charging, quick release, one-button control by remote controller; 3. Lightweight and safe, will not increase the burden of the drone or damage the drone, easy to install and disassemble; 4. Can be used on most models. Applicable for DJI Mini 4 Pro / 3 Pro / Air 3 / Mavic 3 / 3 Pro / Neo / Avata 2 5. Product size: 5.2 x 5 x 2.9cm (thrower), 10 x 5 x 1.2 (remote controller) 6. Net weight: 103.9g (42g thrower) 7. Packing list: Thrower x 1, remote controller x 1, hand strap x 1, USB charging cable x 1, long hanging rope x 1, magic belt x 1, product description x 1 Note: The "red light" is displayed when charging, and the "green light" is displayed when fully charged; when installing the thrower, try to avoid blocking the drone sensor. It is strictly forbidden to install the thrower on the top of the drone to prevent the hanging objects from being entangled on the propeller. The actual load of the thrower is 1kg, but you need to pay attention to the MAX load of the drone. The remote control distance of 500 meters is the result of the manufacturers test in an open environment without interference. The actual remote control distance may be affected by different usage environments.Specification: General Compatible with DJI: Neo, Avata 2, Mini 4 Pro, Air 3, Mavic 3 Pro, Mini 3, Mini 3 Pro, Mavic 3 Package Weight One Package Weight 0.17kgs / 0.37lb One Package Size 12cm * 8cm * 5cm / 4.72inch * 3.15inch * 1.97inch Qty per Carton 100 Carton Weight 15.80kgs / 34.83lb Carton Size 52cm * 42cm * 25cm / 20.47inch * 16.54inch * 9.84inch Loading Container 20GP: 488 cartons * 100 pcs = 48800 pcs40HQ: 1133 cartons * 100 pcs = 113300 pcs
£ 23.99 GBP
-
BRDRC For DJI OSMO Pocket 3 Full Set Portable Carrying Case Shoulder Storage Bag, For DJI OSMO Pocket 3
1. The full set of accessories can be stored reasonably, with a thickness of only 8cm, which can be stored in backpacks and suitcases for portable travel; 2. Shock-absorbing lining, one-piece molding, effective fixation, precise fit of equipment and accessories; 3. Hard shell protection, effectively alleviates external impact, resists bumps and friction during travel; 4. Optimized material, scratch-proof and splash-proof; 5. Double zipper design, no slot jam, smooth pulling; 6. Safe and odorless, healthy and environmentally friendly, more assured to use; 7. There is an accessory storage net bag on the upper cover, which can be used to place data cables, memory cards, filters and other accessories according to needs; 8. Comfortable to carry, unique non-slip handle, easy to travel and convenient. 9. Main material: PU + flannel 10. Product size: 22.5 x 8 x 22.4cm 11. Net weight: 374gSpecification: General Compatible with DJI: Osmo Pocket 3 Package Weight One Package Weight 0.47kgs / 1.04lb One Package Size 25cm * 20cm * 10cm / 9.84inch * 7.87inch * 3.94inch Qty per Carton 20 Carton Weight 10.20kgs / 22.49lb Carton Size 52cm * 50cm * 40cm / 20.47inch * 19.69inch * 15.75inch Loading Container 20GP: 256 cartons * 20 pcs = 5120 pcs40HQ: 595 cartons * 20 pcs = 11900 pcs
£ 15.99 GBP
-
BRDRC For DJI Mavic Pro Air-Dropping System Thrower Parabolic, For DJI Mavic Pro
1. Suitable for DJI Mavic Pro drones; 2. Can be delivered remotely, used for advertising, throwing bait, throwing gifts, delivering meals, sending wedding rings, etc.; 3. USB charging, quick release, one-button control with DJI remote controller; 4. Lightweight and safe, will not increase the burden on the drone or damage it, easy to install and disassemble; 5. The tripod is installed at the bottom, which does not affect the propellers and sensors! Parameters: 1. Maximum load: 500g 2. Built-in battery capacity: 150 mAh 3. Standby time: about 12 hours 4. Can be opened after one charge: about 500 times 5. Self-charging time: 1.5 hours Other parameters: 1. Main material: ABS 2. Product size: 10 x 8.5x5.5cm 3. Net weight: 82g 4. Packing list: Thrower x 1 Heightening rack (set) x 1 Rubber band x 1 Bandage x 2 Photosensitive sensor connection cable x 1 Thrower USB charging cable x 1 Throwing hanging ring x 1Specification: General Compatible with DJI: Mavic Pro Package Weight One Package Weight 0.15kgs / 0.33lb One Package Size 12cm * 11cm * 7cm / 4.72inch * 4.33inch * 2.76inch Qty per Carton 100 Carton Weight 13.80kgs / 30.42lb Carton Size 52cm * 35cm * 25cm / 20.47inch * 13.78inch * 9.84inch Loading Container 20GP: 586 cartons * 100 pcs = 58600 pcs40HQ: 1360 cartons * 100 pcs = 136000 pcs
£ 25.99 GBP
-
BRDRC For DJI Mini 4 Pro BRDRC Lens Hood Gimbal Anti-Glare Sunshade Cover, For DJI Mini 4 Pro
1. Effectively block light to prevent stray light from entering the lens and affecting the shooting picture; 2. Lossless flight without blocking the forward vision system; 3. Safety protection, reserve space for the lens, block light and protect the lens at the same time; 4. Tailor-made for Mini 4 Pro, fits the body curve, does not affect shooting and lens rotation; 5. With a tripod, comprehensive protection, safe flying; 6. Comfortable feel and firm installation. 7. Main material: ABS 8. Product size: 8.2 x 4.6 x 7.6cm 9. Net weight: 15.4gSpecification: General Compatible with DJI: Mini 4 Pro Package Weight One Package Weight 0.04kgs / 0.09lb One Package Size 9cm * 8cm * 5cm / 3.54inch * 3.15inch * 1.97inch Qty per Carton 200 Carton Weight 7.80kgs / 17.20lb Carton Size 42cm * 36cm * 25cm / 16.54inch * 14.17inch * 9.84inch Loading Container 20GP: 705 cartons * 200 pcs = 141000 pcs40HQ: 1637 cartons * 200 pcs = 327400 pcs
£ 15.99 GBP
-
BRDRC For DJI OSMO Pocket 3 BRDRC Sunshade Lens Protective Cover Hood, For DJI OSMO Pocket 3
1. Lens hood to reduce interference from strong light 2. ABS high-quality material, fine workmanship and good texture 3. Precise mold opening, fit the body design, does not affect the startup, does not affect the gimbal rotation 4. Enlarged opening design, ensures the shading effect while not affecting the lens shooting 5. Main material: ABS 6. Product size: 6.8 x 6.3 x 5.5cm 7. Net weight: 12.8g Note: After installation, turn on the machine and adjust the gimbal, try to choose FPV mode, otherwise it will affect the shooting.Specification: General Compatible with DJI: Osmo Pocket 3 Package Weight One Package Weight 0.03kgs / 0.07lb One Package Size 8cm * 7cm * 6cm / 3.15inch * 2.76inch * 2.36inch Qty per Carton 200 Carton Weight 7.00kgs / 15.43lb Carton Size 42cm * 35cm * 50cm / 16.54inch * 13.78inch * 19.69inch Loading Container 20GP: 362 cartons * 200 pcs = 72400 pcs40HQ: 842 cartons * 200 pcs = 168400 pcs
£ 6.99 GBP
-
BRDRC For DJI Mavic Air 2 / Air 2S BRDRC Drone Propeller Protective Guard Anti-collision Ring, For DJI Mavic Air 2 / Air 2S
1. Separate the propeller from the outside to prevent the propeller from accidentally injuring people or cutting objects; 2. At the same time, prevent foreign objects from hitting the propeller to improve flight safety; 3. Combined with the heightened landing gear design, the drone is effectively raised by 2.5cm to protect the gimbal; 4. Exquisite design allows for quick disassembly and assembly. 5. Main material: ABS 6. Product size: about 14.3 x 18.5 x 9cm (front), about 14.3 x 18.5 x 7cm (back) 7. Net weight: 74gSpecification: General Compatible with DJI: Air 2S, Mavic Air 2 Package Weight One Package Weight 0.20kgs / 0.44lb One Package Size 21cm * 20cm * 7.5cm / 8.27inch * 7.87inch * 2.95inch Qty per Carton 20 Carton Weight 4.50kgs / 9.92lb Carton Size 44cm * 42cm * 38cm / 17.32inch * 16.54inch * 14.96inch Loading Container 20GP: 379 cartons * 20 pcs = 7580 pcs40HQ: 881 cartons * 20 pcs = 17620 pcs
£ 12.99 GBP
-
BRDRC For DJI Mini 4 Pro BRDRC Lens Protective Cover Gimbal Cover, For DJI Mini 4 Pro
1. Integrated protection of the gimbal sensor to prevent scratches caused by collisions with foreign objects; 2. Tailor-made for DJI Mini 4 Pro, precise fit, stable, and not easy to loosen; 3. Does not affect the storage of the drone, and protects the gimbal camera at all times during storage and transportation; 4. PC material, high gloss, strong toughness, no damage to the fuselage, beautiful and practical; 5. One-step installation and disassembly, saving time and effort. 6. Main material: PC 7. Product size: 7.1 x 5.5 x 7.5cm 8. Net weight: 11.9gSpecification: General Compatible with DJI: Mini 4 Pro Package Weight One Package Weight 0.05kgs / 0.10lb One Package Size 8cm * 7cm * 7cm / 3.15inch * 2.76inch * 2.76inch Qty per Carton 200 Carton Weight 6.50kgs / 14.33lb Carton Size 47cm * 42cm * 35cm / 18.5inch * 16.54inch * 13.78inch Loading Container 20GP: 385 cartons * 200 pcs = 77000 pcs40HQ: 896 cartons * 200 pcs = 179200 pcs
£ 6.99 GBP
-
BRDRC For DJI Mavic Air 2S BRDRC Drone Legs Feet Cover Protective Pad Dust-proof Cover, For DJI Mavic Air 2S
1. Made of TPU material, wear-resistant and scratch-resistant; 2. It can effectively protect the tripod from wear during takeoff and landing; 3. It is small and light, weighing only 5.4g, and does not affect the flight of the drone; 4. Equipped with adhesive reinforcement mud, which is stable and does not leave glue, and is easy to install and remove. 5. Main material: TPU 6. Product size: 1.95 x 1.36 x 1.43cm (front foot pad), 1.18 x 2.57 x 0.74cm (rear foot pad) 7. Packing list: Foot pad (set) x 1 Reinforcement mud x 1Specification: General Compatible with DJI: Air 2S Package Weight One Package Weight 0.01kgs / 0.03lb One Package Size 12cm * 8cm * 1cm / 4.72inch * 3.15inch * 0.39inch Qty per Carton 400 Carton Weight 5.00kgs / 11.02lb Carton Size 52cm * 32cm * 25cm / 20.47inch * 12.6inch * 9.84inch Loading Container 20GP: 641 cartons * 400 pcs = 256400 pcs40HQ: 1488 cartons * 400 pcs = 595200 pcs
£ 6.99 GBP
-
BRDRC For DJI Air 3 BRDRC Lens Protective Cover Gimbal Cover, For DJI Air 3
1. Integrated protection of the gimbal sensor to prevent scratches caused by collisions with foreign objects; 2. Accurate fit, stable, not easy to loosen; 3. Does not affect the storage of the drone, always protects the gimbal camera during storage and transportation; 4. PC material, high gloss, strong toughness, no damage to the fuselage, beautiful and practical; 5. One-step installation and disassembly, saving time and effort. 6. Main material: PC 7. Product size: 8.1 x 7.5 x 7.4cm 8. Net weight: 28.8gSpecification: General Compatible with DJI: Air 3 Package Weight One Package Weight 0.07kgs / 0.15lb One Package Size 9cm * 8cm * 8cm / 3.54inch * 3.15inch * 3.15inch Qty per Carton 100 Carton Weight 5.50kgs / 12.13lb Carton Size 47cm * 42cm * 35cm / 18.5inch * 16.54inch * 13.78inch Loading Container 20GP: 385 cartons * 100 pcs = 38500 pcs40HQ: 896 cartons * 100 pcs = 89600 pcs
£ 6.99 GBP
-
BRDRC For DJI Mavic 3 / 3 Pro BRDRC Drone Propeller Protective Guard Anti-collision Ring, For DJI Mavic 3 / 3 Pro
1. Isolate the propeller blades to prevent them from injuring people or being damaged by foreign objects, thus improving flight safety; 2. Adopt high-toughness materials, strong collision resistance and pressure resistance, effectively preventing propeller blades from injuring people or damaging propeller blades; 3. Combined with the design of heightened landing gear, the drone is effectively heightened by 2cm to protect the fuselage and gimbal from damage; 4. Lightweight design, easy to install and disassemble. 5. Product material: ABS+PC 6. Product size: 18 x 25.5 x 6.7cm (rear protection ring), 18x 25.6 x 5.8cm (front protection ring) 7. Net weight: 122.4g Note: During flight, the APP may prompt that a protection ring is detected, please pay attention to safe flight!Specification: General Compatible with DJI: Mavic 3 Pro, Mavic 3 Package Weight One Package Weight 0.27kgs / 0.60lb One Package Size 24cm * 22cm * 7cm / 9.45inch * 8.66inch * 2.76inch Qty per Carton 20 Carton Weight 6.00kgs / 13.23lb Carton Size 50cm * 45cm * 35cm / 19.69inch * 17.72inch * 13.78inch Loading Container 20GP: 338 cartons * 20 pcs = 6760 pcs40HQ: 786 cartons * 20 pcs = 15720 pcs
£ 12.99 GBP
-
BRDRC For DJI Mavic 2 Pro / Zoom BRDRC Drone Propeller Protective Guard Anti-collision Ring, For DJI Mavic 2 Pro / Zoom Surround
1. The semi-enclosed protective ring fully wraps the propeller blades to prevent the propeller blades from injuring people or being damaged by foreign objects, thereby improving flight safety; 2. High-toughness materials are used, which are resistant to collision and pressure, reducing accidental damage to the machine; 3. The structural reinforcement design further upgrades the anti-collision protection; 4. Lightweight design does not affect flight use. (During flight, the APP may prompt that the protective ring is detected, please pay attention to safe flight!) 5. Main material: PC+ABS 6. Product size: 17 x 24 x 6cm (single protective ring) 7. Net weight: 117gSpecification: General Compatible with DJI: Mavic 2, Mavic 2 Pro Package Weight One Package Weight 0.23kgs / 0.51lb One Package Size 24cm * 22cm * 9cm / 9.45inch * 8.66inch * 3.54inch Qty per Carton 20 Carton Weight 5.20kgs / 11.46lb Carton Size 50cm * 45cm * 45cm / 19.69inch * 17.72inch * 17.72inch Loading Container 20GP: 263 cartons * 20 pcs = 5260 pcs40HQ: 611 cartons * 20 pcs = 12220 pcs
£ 16.99 GBP
-
BRDRC For DJI Air 2S/ Mavic Air 2 BRDRC Drone Propeller Protective Guard Anti-collision Ring, For DJI Air 2S / Mavic Air 2
1. The semi-enclosed protection ring fully wraps the propeller blades to prevent the propeller blades from injuring people or being damaged by foreign objects, thereby improving flight safety; 2. High-toughness materials are used, which are resistant to collision and pressure, reducing accidental damage to the machine; 3. The structural reinforcement design further upgrades the anti-collision protection; 4. Lightweight design, the whole set weighs only 90g, which does not affect flight use. (During flight, the APP may prompt that the protection ring is detected, please pay attention to safe flight!) 5. Main material: ABS 6. Product size: Radius: 10.5cm, MAX size after installation: 47.5 x 39.5 x 10.5cm 7. Net weight: 90gSpecification: General Compatible with DJI: Air 2S, Mavic Air 2 Package Weight One Package Weight 0.26kgs / 0.57lb One Package Size 33cm * 22cm * 9cm / 12.99inch * 8.66inch * 3.54inch Qty per Carton 20 Carton Weight 6.50kgs / 14.33lb Carton Size 66cm * 45cm * 45cm / 25.98inch * 17.72inch * 17.72inch Loading Container 20GP: 199 cartons * 20 pcs = 3980 pcs40HQ: 463 cartons * 20 pcs = 9260 pcs
£ 17.99 GBP
You have seen 240 out of 1205 products