DJI
-
for DJI Mavic 3 YX 1 to 5 Charger With Switch
1. Output: DC 17.6V/12A (each 17.6V/4A)2. Input: 100-240V 50/60Hz3. USB output: DC5V/3A (branch 1.5A)4. With safety switch, energy saving and environmental protection5. With a cooling fan, intelligently start according to the charging temperature, effectively control the temperature of the charger6. 4A current, more stable charging7. It takes about 90 minutes to fully charge 3 batteries8. Covered plug, can prevent short circuit and dust9. Smart chip and control, stable charging without damaging the battery10. Product size: 15.9x10.9x3.6 cm11. Product net weight: US standard 794 grams, European standard 809 grams, Australian standard 810 grams, British standard 864 gramsSpecification: General Compatible with DJI: Mavic 3 Package Weight One Package Weight 0.91kgs / 2.01lb One Package Size 20cm * 20cm * 6cm / 7.87inch * 7.87inch * 2.36inch Qty per Carton 32 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 32 pcs = 5664 pcs40HQ: 412 cartons * 32 pcs = 13184 pcs
£ 51.99 GBP - £ 52.99 GBP
-
BRDRC BRDRC DJI-8936 For DJI Mavic Mini / Mini 2 / Mini SE Beam Paddle Device Propeller Blade Retainer, For DJI Mavic Mini / Mini 2 / Mini SE(Red), For DJI Mavic Mini / Mini 2 / Mini SE(Grey)
1. Fix the propeller on the fuselage to prevent damage to the propeller during storage2. Environmentally friendly materials, will not scratch the fuselage and propeller3. Small size, easy to store, can be kneaded at will, without deformation4. Simple design, quick installation and removal5. Quick disassembly and assembly, effective storage of propellers6. The thickened base design of the oars restrainer effectively protects the fuselage from wear and tear7. Fixed buckle design, easy to install and remove8. Fit the body, effective protection9. Applicable models: suitable for Mavic Mini / Mini 2 / Mini SE10. Note: The product only includes the propeller, nothing else11. Main material: TPU12. Size: 7x6x6.1cm13. Net weight: 23.9g14. Gross weight: 36.9gSpecification: General Compatible with DJI: Mini SE, Mini 2, Mavic Mini Package Weight One Package Weight 0.04kgs / 0.10lb One Package Size 11cm * 7cm * 5cm / 4.33inch * 2.76inch * 1.97inch Qty per Carton 500 Carton Weight 22.00kgs / 48.50lb Carton Size 50cm * 50cm * 44cm / 19.69inch * 19.69inch * 17.32inch Loading Container 20GP: 242 cartons * 500 pcs = 121000 pcs40HQ: 562 cartons * 500 pcs = 281000 pcs
£ 6.99 GBP
-
BRDRC BRDRC DJI-7559 For DJI Mavic 3 / Mini 3 / 3 Pro Remote Control Silicone Protective Cover, For DJI Mavic 3 / Mini 3 / 3 Pro(Black), For DJI Mavic 3 / Mini 3 / 3 Pro(Red), For DJI Mavic 3 / Mini 3 / 3 Pro(Gray)
1. Made of soft silicone material to prevent foreign objects from colliding or scratching the body2. Reinforced surface design, can be kneaded at will without deformation3. The surface is sprayed with oil, which is beautiful and generous, and feels comfortable4. Easy to remove and install5. Real machine mold opening, reasonable hole design, does not affect the use and flight remote control6. Soft touch, anti-slip texture design, anti-slip and anti-sweat, enhance the flight override experience7. Applicable models: suitable for DJI Mavic 3 / Air 2 / Air 2S / Mini 2 / Mini 3 / 3 Pro8. Note: The product only includes a protective case, nothing else9. Material: silicone10. Size: 9.9x15.5x3.5cm11. Net weight: 50.7g12. Gross weight: 55.4gInstallation steps:1. Take off the joystick of the remote control, and put the protective cover on the remote control2. Slightly organize and fit the fuselage3. Install the joystick and use itSpecification: General Compatible with DJI: Mini 3 Pro Package Weight One Package Weight 0.07kgs / 0.15lb One Package Size 20cm * 15cm * 5cm / 7.87inch * 5.91inch * 1.97inch Qty per Carton 468 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 468 pcs = 82836 pcs40HQ: 412 cartons * 468 pcs = 192816 pcs
£ 8.99 GBP
-
For DJI Mavic 2 Pro Gimbal Camera Axial Arm Shell, For DJI Mavic 2 Pro, For DJI Mavic 2 Zoom
1. Compatible models: suitable for DJI Mavic 2 Pro or DJI Mavic 2 Zoom, choose according to your needs 2. Replace damaged or unusable ones with this ones 3. Easy-to-install replacement parts 4. Every item has been inspected and in good condition before shipment. 5. Repairing drones is complicated, please make sure you have professional repair skills, or go to a professional repair department 6. The product only contains the arm shell assembly, without the lens core. Note: This product is a second-hand disassembled product, not a new one.Specification: General Compatible with DJI: Mavic 2 Pro Package Weight One Package Weight 0.09kgs / 0.20lb One Package Size 10cm * 8cm * 5cm / 3.94inch * 3.15inch * 1.97inch Qty per Carton 500 Carton Weight 43.50kgs / 95.90lb Carton Size 60cm * 60cm * 60.4cm / 23.62inch * 23.62inch * 23.78inch Loading Container 20GP: 122 cartons * 500 pcs = 61000 pcs40HQ: 284 cartons * 500 pcs = 142000 pcs
£ 128.99 GBP - £ 311.99 GBP
-
For DJI Mavic Pro Arm Turning Shaft Repair Accessories, Left Rear Turning Shaft, Right Rear Turning Shaft, 1pair Turning Shaft
1. The real machine opens the mold, the accurate match2. Easy to install and use3. Use environmentally friendly materials with confidence4. For DJI Mavic Pro5. Repair accessories for replacement of accidental damage6. Long life and easy installationSpecification: General Compatible with DJI: Mavic Pro Package Weight One Package Weight 0.02kgs / 0.05lb One Package Size 12cm * 12cm * 8cm / 4.72inch * 4.72inch * 3.15inch Qty per Carton 500 Carton Weight 12.00kgs / 26.46lb Carton Size 30cm * 50cm * 40cm / 11.81inch * 19.69inch * 15.75inch Loading Container 20GP: 444 cartons * 500 pcs = 222000 pcs40HQ: 1031 cartons * 500 pcs = 515500 pcs
£ 11.99 GBP - £ 18.99 GBP
-
For DJI Mavic Air 2 Gimbal Camera Shaft Arm Assembly Repair Accessories
1. The real machine opens the mold, the accurate match2. Easy to install and use3. Use environmentally friendly materials with confidence4. For DJI Mavic Air 25. Repair accessories for replacement of accidental damage6. Long life and easy installation7. Material: plastic8. Weight: 30gSpecification: General Compatible with DJI: Mavic Air 2 Package Weight One Package Weight 0.04kgs / 0.09lb One Package Size 18cm * 12cm * 4cm / 7.09inch * 4.72inch * 1.57inch Qty per Carton 500 Carton Weight 27.00kgs / 59.52lb Carton Size 50cm * 50cm * 54cm / 19.69inch * 19.69inch * 21.26inch Loading Container 20GP: 197 cartons * 500 pcs = 98500 pcs40HQ: 458 cartons * 500 pcs = 229000 pcs
£ 93.99 GBP
-
For DJI Mavic 2 Pro / Mavic 2 Front And Rear Machine Arm Shell Repair Accessories, For DJI Mavic 2 Pro / Mavic 2(Right Rear), For DJI Mavic 2 Pro / Mavic 2(Left Front), For DJI Mavic 2 Pro / Mavic 2(Right Front), For DJI Mavic 2 Pro / Mavic 2(Left Rear)
1. Non-destructive installation is quick and easy2. One-piece injection molding, solid and durable structure3. For DJI Mavic 2 Pro / Mavic 24. The real machine opens the mold, the fitting is stable5. Easy to install and use6. Repair accessories for accidental damage replacement7. Long life and easy installationSpecification: General Compatible with DJI: Mavic 2 Pro Package Weight One Package Weight 0.04kgs / 0.09lb One Package Size 15cm * 8cm * 4cm / 5.91inch * 3.15inch * 1.57inch Qty per Carton 500 Carton Weight 17.50kgs / 38.58lb Carton Size 30cm * 50cm * 58.3cm / 11.81inch * 19.69inch * 22.95inch Loading Container 20GP: 304 cartons * 500 pcs = 152000 pcs40HQ: 707 cartons * 500 pcs = 353500 pcs
£ 14.99 GBP
-
YR ESC Board Repair Parts, for DJI Phantom 4 YR ESC Board, for DJI Phantom 4 Pro YR ESC Board
1. For DJI Phantom 4/Phantom 4 Pro2. Replace damaged or unusable ones with new ones3. easy to install replacement parts4. Each item is inspected and in good condition before shipment.5. Repairing the drone is complicated, please make sure you have professional repair skills or go to a professional repair departmentSpecification: General Compatible with DJI: Phantom 4 Package Weight One Package Weight 0.01kgs / 0.03lb One Package Size 10cm * 8cm * 3cm / 3.94inch * 3.15inch * 1.18inch Qty per Carton 500 Carton Weight 5.00kgs / 11.02lb Carton Size 30cm * 50cm * 56.7cm / 11.81inch * 19.69inch * 22.32inch Loading Container 20GP: 313 cartons * 500 pcs = 156500 pcs40HQ: 727 cartons * 500 pcs = 363500 pcs
£ 31.99 GBP - £ 55.99 GBP
-
Gimbal Camera 4K Camera Drone Accessories, For DJI Mavic 2 Pro, For DJI Mavic 2 Zoom, For DJI Mavic 2 Pro With Motherboard, For DJI Mavic 2 Zoom With Motherboard
1. For DJI Mavic 2 Pro / DJI Mavic 2 ZOOM2. Replace damaged or unusable ones with new ones3. Easy to install replacement parts4. Sensor: 1 inch CMOS5. Effective pixels: 20 million6. Repairing the drone is complicated, please make sure you have professional repair skills, or go to a professional repair departmentSpecification: Package Weight One Package Weight 0.12kgs / 0.25lb One Package Size 18cm * 14cm * 8cm / 7.09inch * 5.51inch * 3.15inch Qty per Carton 98 Carton Weight 10.88kgs / 23.98lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 98 pcs = 17346 pcs40HQ: 412 cartons * 98 pcs = 40376 pcs
£ 191.99 GBP - £ 384.99 GBP
-
For DJI Mavic Air 2S Gimbal Camera Assembly without Lens, Camera Assembly
1. Compatible models: for DJI Mavic Air 2s2. Made of high quality material, reliable and durable3. Maintenance accessories for accidental damage replacement, making maintenance more worry-free4. Long service life and easy to install.5. Repairing drones is complicated, please make sure you have professional repair skills or go to a professional repair department6. Note: the lens is not includedSpecification: General Compatible with DJI: Air 2S Package Weight One Package Weight 0.10kgs / 0.23lb One Package Size 14cm * 12cm * 3cm / 5.51inch * 4.72inch * 1.18inch Qty per Carton 288 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 288 pcs = 50976 pcs40HQ: 412 cartons * 288 pcs = 118656 pcs
£ 191.99 GBP
-
For DJI Mavic Mini 3 Pro / Mini 3 Head Camera Shock Absorber Ball, Style:, Left 3 Holes, Right 4 Holes, 1 Pair
1. Real machine mold opening, accurate matching2. Easy to install and easy to use3. Environmentally friendly materials, safe to use4. For DJI Mavic Mavic Mini 3 Pro / Mini 35. Repair parts for accidental damage and replacement6. Long service life and easy installation7. Note: The delivery only includes the shock absorber ball, excluding the drone and other accessoriesSpecification: General Compatible with DJI: Mini 3 Pro Package Weight One Package Weight 0.01kgs / 0.03lb One Package Size 24cm * 12cm * 4cm / 9.45inch * 4.72inch * 1.57inch Qty per Carton 146 Carton Weight 1.02kgs / 2.25lb Carton Size 30cm * 30cm * 37.3cm / 11.81inch * 11.81inch * 14.69inch Loading Container 20GP: 794 cartons * 146 pcs = 115924 pcs40HQ: 1844 cartons * 146 pcs = 269224 pcs
£ 5.99 GBP - £ 6.99 GBP
-
CQT CQT Drone Repair Screwdriver Set For DJI Mavic3 / Mini / Mini 2 / Air2 / Air2S / FPV / Phantom3 / 4 / Mini3 / 4Pro, 25-In-1
1. Professional screwdriver set, professional design, suitable for almost all DJI drones2. The design of the rotating disc at the top makes it feel comfortable and easy to unscrew the screw3. Using chrome vanadium steel batch head, high hardness and not easy to slip, aluminum alloy handle, anti-rust, beautiful and light4. Magnetic suction design, more convenient to replace the bit5. Aluminum alloy handle, anti-rust and beautiful, light and easy to carry6. Leather storage bag, beautiful and elegant, built-in bit buckle, easy to store7. Storage bag size: 10.5 x 6.6 cm8. Weight: about 120 grams/set (including storage bag)Specification: General Compatible with DJI: Mini 4 Pro, Mini 3 Pro, Mavic 3, Air 2S, Mini 2, Mavic Air 2, Mavic Mini, FPV, Phantom 4, Phantom 3 Standard Package Weight One Package Weight 0.10kgs / 0.22lb One Package Size 11cm * 7cm * 2cm / 4.33inch * 2.76inch * 0.79inch Qty per Carton 224 Carton Weight 21.50kgs / 47.41lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 224 pcs = 39648 pcs40HQ: 412 cartons * 224 pcs = 92288 pcs
£ 6.99 GBP
-
CQT CQT 913492 Floating Heightened Drone Landing Gear Buoyancy Rod, For DJI Mini 3 Pro
1. The buoyancy rod can provide buoyancy for the drone, and can easily take off and land on the water surface2. Increase the buoyancy rod of the tripod to effectively increase the height by 60mm to avoid damage to the fuselage and gimbal in an uneven ground environment3. The weight of the tripod + buoyancy rod is only 32 grams, which will hardly increase the flight burden4. It is fixed with a nylon cable tie buckle, easy to disassemble and reusable5. Install the buoyancy stick only to take off and land on the calm water surface, not on the water surface with waves, otherwise there will be a danger of overturning6. Product size: 24 x 5 x 8 cm7. Product weight: 32 grams8. Note: Due to the large volume of the floating tripod, it will increase the overall wind area of the aircraft after installation, so it is not suitable for flying at high altitudes or in windy environments!Packing list:-Tripod x 2-Buoyancy Rod x 2-Wire tie x 8Specification: General Compatible with DJI: Mini 3 Pro Package Weight One Package Weight 0.11kgs / 0.24lb One Package Size 25cm * 6cm * 9cm / 9.84inch * 2.36inch * 3.54inch Qty per Carton 288 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 288 pcs = 50976 pcs40HQ: 412 cartons * 288 pcs = 118656 pcs
£ 17.99 GBP
-
For DJI Avata CQT 913407 Battery Body Contact TPU Dust-proof Plugs Moisture Protection Cover, 4PCS/Set
1. Effectively prevent dust from entering, dust-proof, moisture-proof and short-circuit proof2. Easy to install and not easy to fall off3. Made of TPU plastic material, soft and non-sticky, not easy to deform4. Closely fit with the interface, not easy to fall off, small and portable5. Material: Silicone6. Features: waterproof and dustproof, tight fit, lightweight and portable7. Specifications: battery dust plug x3 + body dust plug x18. Product size: 17 x 9 x 5mm9. Product weight: 1.5g/set10. Note: Only dust-proof plugs will be shipped, nothing else!Specification: General Compatible with DJI: Avata Package Weight One Package Weight 0.01kgs / 0.03lb One Package Size 6cm * 3cm * 2cm / 2.36inch * 1.18inch * 0.79inch Qty per Carton 500 Carton Weight 7.00kgs / 15.43lb Carton Size 47cm * 23cm * 15cm / 18.5inch * 9.06inch * 5.91inch Loading Container 20GP: 1644 cartons * 500 pcs = 822000 pcs40HQ: 3817 cartons * 500 pcs = 1908500 pcs
£ 6.99 GBP
-
For DJI Avata Battery Anti-release Buckle Wear-resistant Battery Protection Buckle, For DJI Avata Battery Anti-release Buckle
1. Applicable models: suitable for DJI Avata drone2. Light weight, does not affect the flight of the aircraft. Does not affect the storage of the machine.3. Buckle is not easy to loosen, can prevent the battery from falling off in flight.4. Fitted with drone body design, the body will not be damaged during installation and removal.5. Main material: ABS materialSpecification: General Compatible with DJI: Avata Package Weight One Package Weight 0.03kgs / 0.07lb One Package Size 8cm * 8cm * 5cm / 3.15inch * 3.15inch * 1.97inch Qty per Carton 500 Carton Weight 14.00kgs / 30.86lb Carton Size 30cm * 50cm * 36.7cm / 11.81inch * 19.69inch * 14.45inch Loading Container 20GP: 484 cartons * 500 pcs = 242000 pcs40HQ: 1124 cartons * 500 pcs = 562000 pcs
£ 6.99 GBP
-
For DJI Avata Carbon Fiber Backpack Shockproof And Waterproof Bag, For DJI Avata Carbon Fiber Backpack
1. Large capacity, very practical and convenient to use. Durable and wear-resistant, sturdy enough.2. Pre-cut foam holds everything in place to prevent scratches, collisions and drops.3. Adjustable shoulder straps and a side handle, you can easily carry the case in two ways.4. Highly resistant to pressure, drop and shock absorption, spill-resistant fabric, all-round protection for your equipment5. Two-way zipper, open and close smoothly without jamming6. Material: PC + ABS + Oxford cloth + EVA7. Weight: 1065g8. Size: 40 x 28 x 15cmSpecification: General Compatible with DJI: Avata Package Weight One Package Weight 1.15kgs / 2.53lb One Package Size 42cm * 29cm * 17cm / 16.54inch * 11.42inch * 6.69inch Qty per Carton 26 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 26 pcs = 4602 pcs40HQ: 412 cartons * 26 pcs = 10712 pcs
£ 45.99 GBP
-
For DJI Mavic 3 Classic Drone Storage Box Portable Explosion-proof Case, Explosion-proof Case
1.Anti-compression and wear resistance, good waterproof, fit the fuselage2. Large-capacity partition storage, can hold the aircraft / propeller / battery / remote control / charger, etc.3. Inner pearl cotton + EVA, good shock absorption, hold everything in place to prevent scratches, collisions and drops.4. Compatible models: for DJI Mavic 3 Classic 5. Material: PP + EVA + pearl cotton6. Weight: 1665g7. Size: 40 x 34 x 14cmSpecification: Package Weight One Package Weight 2.00kgs / 4.42lb One Package Size 45cm * 36cm * 16cm / 17.72inch * 14.17inch * 6.3inch Qty per Carton 16 Carton Weight 32.00kgs / 70.55lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 16 pcs = 2832 pcs40HQ: 412 cartons * 16 pcs = 6592 pcs
£ 96.99 GBP
-
For DJI FPV Drone Shoulder Bag Waterproof Wear-resistant Oxford Fabric Storage Bag, For DJI FPV Drone Shoulder Bag
1. Large capacity, very practical and convenient to use. Durable and wear-resistant, sturdy enough.2. Pre-cut foam holds everything in place to prevent scratches, collisions and drops.3. An adjustable shoulder strap and a side handle make it easy to carry the case in two ways. The adjustable padded shoulder straps are designed to take the pressure off your shoulders.4. Each part has a separate internal space. Keep your flying machine safe with sturdy high-density foam.5. Versatile enough to be used as a general storage backpack on the go.6. High quality hardware zipper, high density waterproof nylon fabric.7. Compatibility: Suitable for DJI FPV Combo8. Material: EVA lining + nylon fabric9. Product size: 390 x 290 x 170mm10. Product weight: about 996gSpecification: General Compatible with DJI: FPV Package Weight One Package Weight 1.04kgs / 2.29lb One Package Size 30cm * 18cm * 40cm / 11.81inch * 7.09inch * 15.75inch Qty per Carton 26 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 26 pcs = 4602 pcs40HQ: 412 cartons * 26 pcs = 10712 pcs
£ 45.99 GBP
-
For DJI Ronin RS3 Pro Adjustable Angle Aluminum Alloy Handle Stabilizer, For DJI Ronin RS3 Pro
1. CNC finished aluminum alloy handle, high strength, high hardness and durable2. Low Angle shooting, both hands holding, reduce hand pressure, easy to deal with3. Adjust to any angle to meet the needs of different shooting angles4. Provide 1/4 screw hole and 3/8 Alai positioning hole for convenient expansion of supplementary light, microphone, monitor and other auxiliary equipment to meet different shooting needs5. Silicone anti-slip handle, comfortable to hold without tiring hands6. Applicable models: for DJI Ronin RS3 / RS 3 Pro / RS 2 / RSC 27. Material: aluminum alloy + silica gelSilicone anti-slip handle, comfortable to hold without tiring hands8. Net weight: 260g9. Gross weight: 306gSpecification: General Compatible with DJI: RS 3 Pro, RS 3, RSC 2, RS 2 Package Weight One Package Weight 0.31kgs / 0.68lb One Package Size 21cm * 11cm * 5cm / 8.27inch * 4.33inch * 1.97inch Qty per Carton 96 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 96 pcs = 16992 pcs40HQ: 412 cartons * 96 pcs = 39552 pcs
£ 37.99 GBP
-
Sunnylife Sunnylife Gimbal Lens Aluminum Anti-collision Bumper For DJI Avata, Sunnylife For DJI Avata(Red), Sunnylife For DJI Avata(Black)
1. Material: aluminum alloy2. All-round protection3. Suitable for: DJI Avata 4. Does not affect the installation and removal of the gimbal cover5. Protection bar will not appear in the lens screen, does not affect the aircraft shooting6. Aviation-grade aluminum alloy, high strength and hardness, light weight, durable7. Anti-collision upgrade, effective protection, in the crossing machine by the impact can effectively relieve the impact, reduce or avoid the gimbal damage8. Net weight: 5gSpecification: General Compatible with DJI: Avata Package Weight One Package Weight 0.02kgs / 0.05lb One Package Size 15cm * 11cm * 2cm / 5.91inch * 4.33inch * 0.79inch Qty per Carton 500 Carton Weight 12.00kgs / 26.46lb Carton Size 30cm * 50cm * 40cm / 11.81inch * 19.69inch * 15.75inch Loading Container 20GP: 444 cartons * 500 pcs = 222000 pcs40HQ: 1031 cartons * 500 pcs = 515500 pcs
£ 14.99 GBP
-
Sunnylife Sunnylife MM3-YK466 RC Joystick Screen Scratch Resistant Remote Control Protective Hood for DJI Mini 3 Pro
1. The two-in-one design is both a protective cover and a hood. Two-stage shading, free viewing angle2. Effectively protect the screen, keys and joystick. Fits the shape and structure of the remote control, effectively preventing squeezing and scratching the screen and preventing accidental touch buttons.3. It can be closed with one click, avoiding repeated disassembly and assembly of the rocker.4. For DJI Mini 3 Pro5. Free storage, no need to remove the protective cover6. Precise hole opening without affecting the antenna signal and speaker hole7. Material: plastic8. Shipping list: protective cover x 1 + thumb screws x 29. Net weight: 65g10. Gross weight: 113gSpecification: General Compatible with DJI: Mini 3 Pro Package Weight One Package Weight 0.13kgs / 0.30lb One Package Size 18cm * 13cm * 6cm / 7.09inch * 5.12inch * 2.36inch Qty per Carton 60 Carton Weight 7.20kgs / 15.87lb Carton Size 60cm * 40cm * 40cm / 23.62inch * 15.75inch * 15.75inch Loading Container 20GP: 277 cartons * 60 pcs = 16620 pcs40HQ: 644 cartons * 60 pcs = 38640 pcs
£ 11.99 GBP
-
Sunnylife Sunnylife AT-BHM476 HD Explosion-proof Film Glasses Protector For DJI Goggles 2, Goggles 2 Film
1. High-definition and high-transparency, restore lossless image quality. Let you freely enjoy the immersive flight experience2. Sweat-proof and dust-proof, explosion-proof and scratch-proof. Effective protection of glasses to prevent repeated wearing and the erosion of lenses by sweat and dust3. Thin and flexible, translucent and easy to fit4. For DJI Goggles 25. Nano electrostatic adsorption, no bubbles and easy to fitShipping list:- 4 x protective films- 2 x cleaning kits- 2 x cleaning cloth- 2 x dust-proof stickers- 1 x storage boxSpecification: General Compatible with DJI: Avata Package Weight One Package Weight 0.07kgs / 0.16lb One Package Size 10cm * 7cm * 2cm / 3.94inch * 2.76inch * 0.79inch Qty per Carton 600 Carton Weight 4.20kgs / 9.26lb Carton Size 60cm * 35cm * 40cm / 23.62inch * 13.78inch * 15.75inch Loading Container 20GP: 317 cartons * 600 pcs = 190200 pcs40HQ: 736 cartons * 600 pcs = 441600 pcs
£ 6.99 GBP
-
4 PCS / Set Sunnylife AT-MD475 Dust-proof Waterproof Aluminum Alloy Motor Cover For DJI Avata, Red, Black
1. Ultra-light aviation aluminum alloy, CNC finishing, does not affect the battery life2. The aluminum alloy has good thermal conductivity and will not affect the heat dissipation of the motor during flight3. Splash-proof, moisture-proof, dust-proof and bump-proof, extending the service life of the motor4. One-time installation, long-term use; does not affect the disassembly and assembly of the propeller, avoids repeated disassembly and assembly of the motor cover, and protects the motor at all times5. Applicable models: for DJI Avata6. Material: aluminum alloy7. Net weight: 8g (4 pcs/set)8. Gross weight: 18g (4 pcs/set)Specification: General Compatible with DJI: Avata Package Weight One Package Weight 0.03kgs / 0.07lb One Package Size 7cm * 7cm * 2cm / 2.76inch * 2.76inch * 0.79inch Qty per Carton 400 Carton Weight 1.20kgs / 2.65lb Carton Size 56cm * 35cm * 20cm / 22.05inch * 13.78inch * 7.87inch Loading Container 20GP: 680 cartons * 400 pcs = 272000 pcs40HQ: 1579 cartons * 400 pcs = 631600 pcs
£ 14.99 GBP
-
Crossbody Handbag Shoulder Bag Organizer Bag for DJI Mini 3 Pro
1. Large-capacity partition storage, can install the fuselage, remote control with screen, batteries, propellers, chargers and cables, etc.2. 900D waterproof membrane material, short-term waterproof barrier3. Strong compression resistance, anti-drop shock absorption, comprehensive protection of your equipment4. Handle + shoulder strap design, suitable for different occasions5. Material: 900D+flannel6. Dimensions: 21 x 20 x 11.5cm7. Weight: 505 gramsSpecification: General Compatible with DJI: Mini 3 Pro Package Weight One Package Weight 0.36kgs / 0.80lb One Package Size 25cm * 23cm * 12cm / 9.84inch * 9.06inch * 4.72inch Qty per Carton 54 Carton Weight 19.33kgs / 42.62lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 54 pcs = 9558 pcs40HQ: 412 cartons * 54 pcs = 22248 pcs
£ 20.99 GBP
You have seen 288 out of 1205 products