VGA Converter (Computer & Networking »VGA Series)

1. This device converts PC VGA to composite (yellow RCA)/or S-video TV display signal.2. It supports VGA passthrough, so you can keep your computer monitor connected while sending signal to TV/projector. All outputs (VGA, RCA, S-Video) are looped and displayed simultaneously.3. The device comes with fine-tuning controls to adjust the image quality to your liking.4. Play VCDs, DVDs, Movies, Internet shows on TV or experience PC games, presentations, documents, etc. on TV.5. Plug and play, no driver required. For PC laptops and desktops.6. VGA signal resolution: 640x480, 800x600, 1024x768, 1280x1024, 1920x1080, 1600x1200, 2560x1600 (covering all VGA resolutions smaller than WQXGA).7. Supported standard: NTSC, NTSC-EIAJ, PAL, PAL-M, PAL-N TV standard.

Read more less

1. It is widely used in Displayport signal source input of desktop/laptop/tablet computer and other devices. After connecting through this adapter, it can make the output of TV/monitor/projector with VGA interface2. Plug and play support, no power required3. The resolution is up to 720P / 1080i / 1080P4. When the product is connected, connect the VGA port first, then connect to the device5. Input: Displayport6. Output: VGA7. Only one-way use is supported8. Plug and play without power9. Data transfer speed: 5 MB/s

Read more less

1. Model: FY1316 2. Input: VGA + L / R (Audio) DC 5V / 1A 3. Output: HDMI, HDMI with Audio 4. Size: 9x6.4x3cm Function Introduction: 1. Video input interface: HDMI 2. The Video output interface: VGA , DC 5V / 1A Video output resolution: (Resolution of VGA will be changed according to HDMI Signal change) 800x600 at 60Hz,1024x768 at 60Hz, 1280x720 at 60Hz, 1280x1024 60Hz, 1920x1200 at 60Hz, 1920x1080 at 60Hz 3. The audio output interface: standard RCA stereo Rca JACK interface 4. The signal indicator - When the indicator light is on , it means that the HDMI be recognized successfully, and the item convert signal normally, a flashing light means the failure of identifying the HDMI interface - If the light blinks, it means HDMI interface is fail to be recognized 5. Plug and play, no need external power supply - The clip consumes very little power, requres no external power supply, no need driver installation.

Read more less