Tripod Holder
1. Made with ABS + high-density rubber-coated robust which makes it sturdier, more durable and better the skid resistance.
2. The desk tripod stand is lightweight and mini size, easy to storage and travel comfort. It can easily be placed in your backpack.
3. 360 degree rotation ballhead allows you to capture good shot.
4. Flexible tripod legs which allow you to angle your camera in various angles while capturing those special moments. You can also place it anywhere you can think of, like lampposts, fence posts, tree limbs, chairs, doorknobs etc.
5. 1/4 inch screw is fully Applicable for Nikon, Canon, Pentax Sony, Panasonic, Olympus, Kodak, Fujifilm, Casio, GoPro Action cameras etc.
6. With gear limiting, load: 2KG
Studio Light
1. This is camcorder professional LED camera light.
2. Mini design, easy to take in pocket and light for phone photography or DSLR camera photography.
3. Include independent power switch and keep the same brightness out when switch it on again.
4. Support 4 x AA batteries (batteries not included) power input, more convenient to use.
5. Support external power input (Type-C port), suitable for long time use.
6. Built-in 104 pieces high quality LED beads.
7. Rotating the switch can adjust the brightness without filter plates, suitable for a variety of photography atmosphere.
8. Highly efficient, power-saving, low energy consumption.
9. Can be fixed in the camera hot shoe socket, use on professional light frame or camera tripod.
10. With dual cold shoes slots, can install microphones or cellphone.
11. With a 1/4 inch female screw for Canon, Nikon, Sony, and other Camcorder. In additional, it could be used on a 1/4 inch tripod to help Phone owner to take wonderful videos and photos.
Specifications
1. Material: ABS
2. Color temperature: 3200-6400K
3. Brightness: 1800LM
4. Lamp beads: 104pcs
5. Index: Ra>97
6. Size 10.5 * 8.8 * 3.5cm
7. Power supply: TYPE-C/4 x AA battery (not included)
8. Input voltage: 5V
Microphone
1. The microphone can be fixed on the DV with microphone hole and path. The MS stereo system enables a natural sound pick-up. Delivering a stereo sound image with superb clarity
2. Load impedance: <0.68Kohm
3. Fit any device that have 3.5mm MIC socket and hot shoe, suitable for 3.5mm jack phones
4. Microphone type: electret condenser microphone
5. Microphone specification: 14*6.5mm
6. Directivity: Single point
7. Frequency response: 20-20000Hz
8. Sensitivity: -42dB +/- 3dB (0dB = 1V / Pa).
9. Signal to noise ratio: >65DBSPL
10. Test voltage: 1.5V
Phone Clamp
1. Made of high quality sponge rubber protective and plastic body, durable and appropriate protection of mobile phone.
2. Base and back each has a 1/4 inch screw holes,can connect to 1/4 inch screw of any device.
3. Sponge and rubber mat protect mobile phone from scratch.
4. This is a mobile phone accessory, apply to selfie stick, tripod mount, monopod and more.
5. With a cold shoe base to install a flash and micophone with cold shoe adapter.
6. Clamp range: 5.8cm to 8.5cm, almost can clip all the mobile phones.
7. Perfect for taking selfies and recording videos hands free.
Package List
1. Tripod Holder x 1
2. Studio Light x 1
3. Microphone x 1
4. Phone Clamp x 1
5. Bluetooth Remote Control x 1
6. Wind Shield x 1
7. USB Cable x 1
8. Filter Plates x 2
9. 3.5mm Audio Adapter Cable x 2
10. Protective Bag x 1
11. Color Package Box x 1
1. Made with ABS + high-density rubber-coated robust which makes it sturdier, more durable and better the skid resistance.
2. The desk tripod stand is lightweight and mini size, easy to storage and travel comfort. It can easily be placed in your backpack.
3. 360 degree rotation ballhead allows you to capture good shot.
4. Flexible tripod legs which allow you to angle your camera in various angles while capturing those special moments. You can also place it anywhere you can think of, like lampposts, fence posts, tree limbs, chairs, doorknobs etc.
5. 1/4 inch screw is fully Applicable for Nikon, Canon, Pentax Sony, Panasonic, Olympus, Kodak, Fujifilm, Casio, GoPro Action cameras etc.
6. With gear limiting, load: 2KG
Studio Light
1. This is camcorder professional LED camera light.
2. Mini design, easy to take in pocket and light for phone photography or DSLR camera photography.
3. Include independent power switch and keep the same brightness out when switch it on again.
4. Support 4 x AA batteries (batteries not included) power input, more convenient to use.
5. Support external power input (Type-C port), suitable for long time use.
6. Built-in 104 pieces high quality LED beads.
7. Rotating the switch can adjust the brightness without filter plates, suitable for a variety of photography atmosphere.
8. Highly efficient, power-saving, low energy consumption.
9. Can be fixed in the camera hot shoe socket, use on professional light frame or camera tripod.
10. With dual cold shoes slots, can install microphones or cellphone.
11. With a 1/4 inch female screw for Canon, Nikon, Sony, and other Camcorder. In additional, it could be used on a 1/4 inch tripod to help Phone owner to take wonderful videos and photos.
Specifications
1. Material: ABS
2. Color temperature: 3200-6400K
3. Brightness: 1800LM
4. Lamp beads: 104pcs
5. Index: Ra>97
6. Size 10.5 * 8.8 * 3.5cm
7. Power supply: TYPE-C/4 x AA battery (not included)
8. Input voltage: 5V
Microphone
1. The microphone can be fixed on the DV with microphone hole and path. The MS stereo system enables a natural sound pick-up. Delivering a stereo sound image with superb clarity
2. Load impedance: <0.68Kohm
3. Fit any device that have 3.5mm MIC socket and hot shoe, suitable for 3.5mm jack phones
4. Microphone type: electret condenser microphone
5. Microphone specification: 14*6.5mm
6. Directivity: Single point
7. Frequency response: 20-20000Hz
8. Sensitivity: -42dB +/- 3dB (0dB = 1V / Pa).
9. Signal to noise ratio: >65DBSPL
10. Test voltage: 1.5V
Phone Clamp
1. Made of high quality sponge rubber protective and plastic body, durable and appropriate protection of mobile phone.
2. Base and back each has a 1/4 inch screw holes,can connect to 1/4 inch screw of any device.
3. Sponge and rubber mat protect mobile phone from scratch.
4. This is a mobile phone accessory, apply to selfie stick, tripod mount, monopod and more.
5. With a cold shoe base to install a flash and micophone with cold shoe adapter.
6. Clamp range: 5.8cm to 8.5cm, almost can clip all the mobile phones.
7. Perfect for taking selfies and recording videos hands free.
Package List
1. Tripod Holder x 1
2. Studio Light x 1
3. Microphone x 1
4. Phone Clamp x 1
5. Bluetooth Remote Control x 1
6. Wind Shield x 1
7. USB Cable x 1
8. Filter Plates x 2
9. 3.5mm Audio Adapter Cable x 2
10. Protective Bag x 1
11. Color Package Box x 1
Can't find the right Product?
If you can't find the product you're looking for, try searching our website or contact us for assistance.
FAQ
Hot Items
